Ïîìîãèòå ïîæàëóéñòà çâóê íàñòðîèòü!

Çäðàâñòâóéòå!
Óñòàíîâèë Suse10.0.
Çâóêà íåò
ìàòü GIGABYTE GA-K8N51PVM9-RH-NV Nvidia business platform ñ èíòåãðèðîâàííûì âèäåî.
ïðè óñòàíîâêå ëèíóêñ ïîêàçàë ÷òî íàø¸ë Realtek è ÷òî çâóê íåñêîíôèãóðèðîâàí
ÿ äîëãî ñêèòàëñÿ ïî ñèñòåìå è áåñòîëêó, ïîòîì âçÿë ìàíóàë ê motherboard è óâèäåë ÷òî ó ìåíÿ Nforce 430, ïîø¸ë íà îôô ñàéò è åïò. äëÿ ìîåé ìàòåðèíñêîé ïëàòû äðàéâåðà òîëüêî äëÿ âèäîâñà è âèñòîñà, ÿ âîñïîëüçîâàëñÿ ïîèñêîì "nforce 430 + linux" è íàø¸ë â àðõèâå äðîâ NFORCE-Linux-x86-1.0-0310-pkg1.run
ïîñòàâèë åãî, è ïðèíÿëñÿ èçó÷àòü releasenote, ò.ê. ÿ ëàìî ïîëíîå, íè÷¸ íå ïîíÿë äî êîíöà è ðåøèë ïîïðîñèòü ïîìîùè ó Âàñ!! ïî÷èòàéòå ïîæàëóéñòà è ñêàæèòå ÷òî ñäåëàòü ÷òîá ïîäêëþ÷èòü ýòè äðàéâåðà, ïîæàëóéñòà! ïîòîìó êàê óæå èíåò íàñòðîèë, ñïóòíèê. èíåò íàñòðîèë, âñ¸ ñóïåð ëèíóêñ ðóëèò, âèíäîâñ âîîáùå óäàëèë è äèñêè ñ exe âûêèíóë, à çâóêà íåò(((

ÿäðî ó ìåíÿ 2.6.13-15
ïðîö AMD3200+64atlon à linux 32 ðàçðÿäíûé, ÷òî Âàì åù¸ ñêàçàòü? ïîìîãèòå ïîæàëóéñòà. à ìîæåò ó êîãî àíàëîãè÷íàÿ ìàòü? ðàññêàæèòå òîãäà êàê Âû ñäåëàëè çâóê è ÷òî äåëàëè ñ âèäåî çàîäíî? îòî ÿ óæå íàäóìàë ðàäè ëèíóêñà íîâóþ êàðòó è âîîáùå ìàòåðèíñêóþ ïëàòó áðàòü.

ÿ çà ïîìîùüþ ïåðâûé ðàç îáðàùàþñü, òàê ÷òî èçâåíèòå åñëè ñèëüíî íàïðÿãàþ òèïà))

Ïî÷åìó íèêêòî íå îòêëèêíèòñÿ? HELP
Âñå òîëüêî ñìîòðÿò...

Ïîòîìó ÷òî ÝÆÄ, ÿ è ïðî÷èå ëèíóêñîéäû îòñóòñòâîâàëè.
Çóêîâîé äðàéâåð îíè ñîäåðæóò.

×èòàåì äàëüøå:

Çíà÷èò íàñòðàèâàòü íàäî ÷åðåç ëèáî ÷åðåç Yast, ëèáî ðóêàìè. Íî, ïðî÷èòàâ äàëåå

Çíà÷èò, Yast îáëàìûâàåòñÿ, íàñòðàèâàòü ïðèä¸òñÿ ðóàìè â ôàéëå /etc/modprobe.d/sound
Êàê ýòî ñäåëàòü íàïèñàíî çäåñü:
http://ruq.ru/davay/R..._distributions

ß êàê òîëüêî óâèäåë ýòè ðåëèç-çàìåòêè, òàê è ïîñòóïèë.
Ðåçóëüòàò 0. Ìîæåò ÿ ÷òî-òî íå òàê äåëàþ, âîò ïîæàëóéñòà ïðîòîêîë ðóêîáëóäà(ò.å. ìîè äåéñòâèÿ)






Îòêðûâàåòñÿ îêîøêî ìèêñåðà, â í¸ì âñ¸ ãëóõî, íåò ñâåäåíèé î êàðòå è ò.ä. ïûòàþñü âêë./âûêë. ãðîìêîñòü, à â îòâåò îêîøêî "ôàèë, volume set/mute bet FAILED
Ïîìîãèòå ïîæàëóéñòà!!! Ìîæåò äðóãèå äðîâà êàêèå íàäî? ÿ âåñü ãóãë ïðîøàðèë, ãèãàáèò/íâèäåà.êîì è ò.ä.



êñòàòè âèäåî òîæå îñòàâëÿåò æåëàòü ëó÷øåãî... è îïÿòü âñ¸ èç çà îòñóòñòèÿ äðîâ. ÂÎÒ íàðîä ñìîòðèòå êàê æàäíîñòü ñãóáèëà, ëèë ÷¸ðò ìåíÿ ä¸ðíóë ýòó áåòà áèçíåñ ìàòü êóïèòü.

âñ¸ ðàâíî çâóêà íåò, âûïîëíèë sh à îí îð¸ò ñìîèðèòå âûøå, ìîë syntax error near unexpected token `}'

À åùå ÿ ñêà÷àë äðàéâåð äëÿ âèäþõè, íà÷àë ñòàâèòü, à îí ãîâîðèò âûêëþ÷è ñíà÷àëà Õ. ÿ çàø¸ë ÷åðåç XEN êîíñîëüíûé áåç ãðàôèêè è îïÿòü çàïóñòèë äðîâà, à îí ãîâîðèò õîðîøî, íî òåïåðü ïóñòè ìåíÿ â èíòåðíåò, íàäî ñêà÷àòü Kernel installer interface äëÿ íâèäèà ôðîì ôòï.íâèäèà.ñîì, è ÿ ðàñòåðÿëñÿ ïîòîìó êàê â XEN bt-gprs-satinet çàïóñòèòü íåïîëó÷èëîñü, ÿ ïîøåë â êäå, îòòóäà áûë èññëåäîâàí ôòï è ÿ íàø¸ë òàêè NVIDIA_kernel-1.0-4365.tar.gz NVIDIA_kernel-1.0-4365-unified.tar.gz ïîòîì ïîïûòàëñÿ ñîáðàòü NVIDIA_kernel-1.0-4365 è îí äàâàé ðóãàòüñÿ
[CODE]
linux:/home/ius/install/NVIDIA_kernel-1.0-4365 # make
/bin/sh: line 0: [: !=: unary operator expected
cc -c -Wall -Wimplicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith -Wcast-qual -Wno-multichar -O -MD -D__KERNEL__ -DMODULE -D_LOOSE_KERNEL_NAMES -DNTRM -D_GNU_SOURCE -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=4365 -DNV_UNIX -DNV_LINUX -DNV_INT64_OK -DNVCPU_X86 -I. -I/lib/modules/2.6.13-15-default/build/include -Wno-cast-qual nv.c
In file included from /usr/include/linux/sched.h:12,
from /usr/include/linux/module.h:9,
from nv-linux.h:28,
from nv.c:14:
/usr/include/linux/jiffies.h:42:3: error: #error You lose.
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:257:30: error: division by zero in #if
In file included from /usr/include/linux/sched.h:12,
from /usr/include/linux/module.h:9,
from nv-linux.h:28,
from nv.c:14:
/usr/include/linux/jiffies.h: In function ‘jiffies_to_msecs’:
/usr/include/linux/jiffies.h:262: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:262: error: (Each undeclared identifier is reported only once
/usr/include/linux/jiffies.h:262: error: for each function it appears in.)
/usr/include/linux/jiffies.h:268:36: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘jiffies_to_usecs’:
/usr/include/linux/jiffies.h:273: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:281:30: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘msecs_to_jiffies’:
/usr/include/linux/jiffies.h:286: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:294:36: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘usecs_to_jiffies’:
/usr/include/linux/jiffies.h:299: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘timespec_to_jiffies’:
/usr/include/linux/jiffies.h:318: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:324: error: ‘SHIFT_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘jiffies_to_timespec’:
/usr/include/linux/jiffies.h:337: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘timeval_to_jiffies’:
/usr/include/linux/jiffies.h:359: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:363: error: ‘SHIFT_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘jiffies_to_timeval’:
/usr/include/linux/jiffies.h:375: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘jiffies_to_clock_t’:
/usr/include/linux/jiffies.h:386: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘clock_t_to_jiffies’:
/usr/include/linux/jiffies.h:397: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘jiffies_64_to_clock_t’:
/usr/include/linux/jiffies.h:417: error: ‘CONFIG_HZ’ undeclared (first use in this function)
In file included from /usr/include/linux/list.h:7,
from /usr/include/linux/wait.h:23,
from /usr/include/asm/semaphore.h:41,
from /usr/include/linux/sched.h:20,
from /usr/include/linux/module.h:9,
from nv-linux.h:28,
from nv.c:14:
/usr/include/linux/prefetch.h: In function ‘prefetch_range’:
/usr/include/linux/prefetch.h:64: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared (first use in this function)
In file included from /usr/include/linux/module.h:22,
from nv-linux.h:28,
from nv.c:14:
/usr/include/asm/module.h:60:2: error: #error unknown processor family
In file included from nv.c:14:
nv-linux.h:51:4: error: #error This driver does not support 2.6.x or newer kernels!
nv-linux.h:69:75: error: linux/tqueue.h: No such file or directory
In file included from /usr/include/asm/fixmap.h:27,
from /usr/include/asm/pgtable.h:17,
from /usr/include/linux/mm.h:36,
from /usr/include/linux/poll.h:11,
from nv-linux.h:74,
from nv.c:14:
/usr/include/asm/acpi.h:31:28: error: acpi/pdc_intel.h: No such file or directory
In file included from nv.c:14:
nv-linux.h:78:75: error: linux/wrapper.h: No such file or directory
In file included from /usr/include/linux/irq.h:21,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/asm/irq.h:16:25: error: irq_vectors.h: No such file or directory
In file included from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/linux/irq.h: At top level:
/usr/include/linux/irq.h:74: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
/usr/include/linux/irq.h:74: error: requested alignment is not a constant
/usr/include/linux/irq.h:76: error: ‘NR_IRQS’ undeclared here (not in a function)
In file included from /usr/include/linux/irq.h:78,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/asm/hw_irq.h:28: error: ‘NR_IRQ_VECTORS’ undeclared here (not in a function)
In file included from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/asm/hardirq.h:13: error: requested alignment is not a constant
In file included from nv.c:14:
nv-linux.h:167:2: error: #error "Couldn't determine number of arguments expected by remap_page_range!"
In file included from nv.c:14:
nv-linux.h: In function ‘NV_SET_AMD_PAGE_ATTRIB’:
nv-linux.h:234: warning: initialization makes pointer from integer without a cast
nv-linux.h: In function ‘NV_CLEAR_AMD_PAGE_ATTRIB’:
nv-linux.h:243: warning: initialization makes pointer from integer without a cast
nv-linux.h: In function ‘NV_IRQL_IS_RAISED’:
nv-linux.h:255: warning: implicit declaration of function ‘__save_flags’
nv.c: At top level:
nv.c:39: error: array type has incomplete element type
nv.c: In function ‘nvos_probe_devices’:
nv.c:223: warning: implicit declaration of function ‘pci_find_class’
nv.c:223: warning: assignment makes pointer from integer without a cast
nv.c:277: warning: assignment makes pointer from integer without a cast
nv.c: In function ‘nvos_malloc_pages’:
nv.c:373: warning: implicit declaration of function ‘mem_map_reserve’
nv.c:386: warning: implicit declaration of function ‘mem_map_unreserve’
nv.c: In function ‘nvos_create_alloc’:
nv.c:439: error: invalid lvalue in assignment
nv.c:449: error: invalid lvalue in assignment
nv.c: In function ‘nvos_find_agp_by_class’:
nv.c:520: warning: assignment makes pointer from integer without a cast
nv.c:531: warning: assignment makes pointer from integer without a cast
nv.c: In function ‘init_module’:
nv.c:783: error: dereferencing pointer to incomplete type
nv.c:784: error: dereferencing pointer to incomplete type
nv.c:785: error: dereferencing pointer to incomplete type
nv.c: In function ‘nv_kern_vma_open’:
nv.c:922: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_vma_release’:
nv.c:956: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: At top level:
nv.c:1047: warning: initialization from incompatible pointer type
nv.c: In function ‘nv_kern_open’:
nv.c:1071: error: invalid lvalue in assignment
nv.c:1091: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c:1124: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type
nv.c:1141: error: invalid lvalue in assignment
nv.c:1160: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_close’:
nv.c:1208: error: ‘CONFIG_HZ’ undeclared (first use in this function)
nv.c:1249: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_mmap’:
nv.c:1295: warning: implicit declaration of function ‘NV_REMAP_PAGE_RANGE’
nv.c:1416: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_ioctl’:
nv.c:1525: error: invalid use of undefined type ‘struct module’
nv.c: In function ‘nv_kern_isr’:
nv.c:1668: warning: implicit declaration of function ‘queue_task’
nv.c:1668: error: ‘tq_immediate’ undeclared (first use in this function)
nv.c:1669: warning: implicit declaration of function ‘mark_bh’
nv.c:1669: error: ‘IMMEDIATE_BH’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_rc_timer’:
nv.c:1693: error: ‘CONFIG_HZ’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_ctl_open’:
nv.c:1763: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c:1772: error: invalid lvalue in assignment
nv.c: In function ‘nv_kern_ctl_close’:
nv.c:1828: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_read_cardinfo’:
nv.c:1903: warning: pointer targets in passing argument 3 of ‘rm_get_device_name’ differ in signedness
nv.c: In function ‘nv_get_phys_address’:
nv.c:2194: warning: passing argument 1 of ‘pmd_offset’ from incompatible pointer type
nv.c:2198: warning: passing argument 1 of ‘lowmem_page_address’ makes pointer from integer without a cast
nv.c: In function ‘nv_alloc_pages’:
nv.c:2250: warning: pointer targets in passing argument 5 of ‘KernAllocAGPPages’ differ in signedness
nv.c:2281: warning: pointer targets in passing argument 6 of ‘rm_alloc_agp_pages’ differ in signedness
nv.c:2309: error: invalid lvalue in assignment
nv.c: In function ‘nv_agp_init’:
nv.c:2637: warning: implicit declaration of function ‘inter_module_get’
nv.c:2638: warning: ‘inter_module_put’ is deprecated (declared at /usr/include/linux/module.h:572)
nv.c: In function ‘nv_start_rc_timer’:
nv.c:2761: error: ‘CONFIG_HZ’ undeclared (first use in this function)
make: *** [nv.o] Îøèáêà 1
{/CODE]
òàì íå áûëî êîíôôèãóðå, òîëüêî ìàêåôèëå
à âî âòîðîì àðõèâå NVIDIA_kernel-1.0-4365-unified.tar.gz
âîáùå òîëüêî 3 ôàéëà, íåèçâåñòíî ÷òî ñ íèìè äåëàòü è ÿ ïîäóìàë ÷òî îíè äëÿ óêðàèíöåâ, ò.ê. íà *.o
nvidia-enterprise.o
nvidia-smp.o
nvidia-up.o



ÿ íå ïðèóíûë, ïîíèìàþ ÷òî ÷åì áîëüøå ñëîæíîñòåé â ëèíóêñå âîçíèêàåò, òåì áîëüøå ìåíÿ ýòî çàâîäèò


òàê êàê ÿ ëàìî â ëèíóêñå, íè÷å íå ïîíÿë è òåïåðü îïÿòü âàñ áåñïîêîþ HELP ME HELP HELP!

âîò åùå ðèäìè îò âèäåîäðîâ, ïîæàëóéñòà ïåðåâåäèòå â êðàöèè















It is recommended to use YOU (YaST Online Update) for (re)installation
of the nvidia driver. There are several reasons for this. First, it's
simple. Second, and this is the most important one, you won't need to
recompile the nvidia kernel module after a kernel update.

Inside YOU enable "Installable and Installed Patches" for "Show Patch
Category" and select "Download NVIDIA® Graphics Driver" from the
patches list (usually at the bottom of the list). Note, that you need
to mark it as "Update" (right mouse click) if you already installed it
before and the driver was uninstalled - for any reason. Proceed as
usual now. After YOU has finished restart your Xserver (i.e. logout
from your Xsession) and you're fine.

People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YOU and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.
Update it - if not already done - via YaST2 Online Update (YOU).

2) Use the nvidia installer for 1.0-9746.

sh NVIDIA-Linux-x86-1.0-9746-pkg1.run -q

3) Configure X.Org with

sax2 -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
enabled, when the nvidia driver is running.

Äîáàâëåíî:
À åùå ÿ ñêà÷àë äðàéâåð äëÿ âèäþõè, íà÷àë ñòàâèòü, à îí ãîâîðèò âûêëþ÷è ñíà÷àëà Õ. ÿ çàø¸ë ÷åðåç XEN êîíñîëüíûé áåç ãðàôèêè è îïÿòü çàïóñòèë äðîâà, à îí ãîâîðèò õîðîøî, íî òåïåðü ïóñòè ìåíÿ â èíòåðíåò, íàäî ñêà÷àòü Kernel installer interface äëÿ íâèäèà ôðîì ôòï.íâèäèà.ñîì, è ÿ ðàñòåðÿëñÿ ïîòîìó êàê â XEN bt-gprs-satinet çàïóñòèòü íåïîëó÷èëîñü, ÿ ïîøåë â êäå, îòòóäà áûë èññëåäîâàí ôòï è ÿ íàø¸ë òàêè NVIDIA_kernel-1.0-4365.tar.gz NVIDIA_kernel-1.0-4365-unified.tar.gz ïîòîì ïîïûòàëñÿ ñîáðàòü NVIDIA_kernel-1.0-4365 è îí äàâàé ðóãàòüñÿ
[CODE]
linux:/home/ius/install/NVIDIA_kernel-1.0-4365 # make
/bin/sh: line 0: [: !=: unary operator expected
cc -c -Wall -Wimplicit -Wreturn-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith -Wcast-qual -Wno-multichar -O -MD -D__KERNEL__ -DMODULE -D_LOOSE_KERNEL_NAMES -DNTRM -D_GNU_SOURCE -D_LOOSE_KERNEL_NAMES -D__KERNEL__ -DMODULE -DNV_MAJOR_VERSION=1 -DNV_MINOR_VERSION=0 -DNV_PATCHLEVEL=4365 -DNV_UNIX -DNV_LINUX -DNV_INT64_OK -DNVCPU_X86 -I. -I/lib/modules/2.6.13-15-default/build/include -Wno-cast-qual nv.c
In file included from /usr/include/linux/sched.h:12,
from /usr/include/linux/module.h:9,
from nv-linux.h:28,
from nv.c:14:
/usr/include/linux/jiffies.h:42:3: error: #error You lose.
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:213:31: error: division by zero in #if
/usr/include/linux/jiffies.h:257:30: error: division by zero in #if
In file included from /usr/include/linux/sched.h:12,
from /usr/include/linux/module.h:9,
from nv-linux.h:28,
from nv.c:14:
/usr/include/linux/jiffies.h: In function ‘jiffies_to_msecs’:
/usr/include/linux/jiffies.h:262: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:262: error: (Each undeclared identifier is reported only once
/usr/include/linux/jiffies.h:262: error: for each function it appears in.)
/usr/include/linux/jiffies.h:268:36: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘jiffies_to_usecs’:
/usr/include/linux/jiffies.h:273: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:281:30: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘msecs_to_jiffies’:
/usr/include/linux/jiffies.h:286: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:294:36: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘usecs_to_jiffies’:
/usr/include/linux/jiffies.h:299: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘timespec_to_jiffies’:
/usr/include/linux/jiffies.h:318: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:324: error: ‘SHIFT_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘jiffies_to_timespec’:
/usr/include/linux/jiffies.h:337: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘timeval_to_jiffies’:
/usr/include/linux/jiffies.h:359: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:363: error: ‘SHIFT_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘jiffies_to_timeval’:
/usr/include/linux/jiffies.h:375: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h:385:6: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘jiffies_to_clock_t’:
/usr/include/linux/jiffies.h:386: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h: In function ‘clock_t_to_jiffies’:
/usr/include/linux/jiffies.h:397: error: ‘CONFIG_HZ’ undeclared (first use in this function)
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h:416:6: error: division by zero in #if
/usr/include/linux/jiffies.h: In function ‘jiffies_64_to_clock_t’:
/usr/include/linux/jiffies.h:417: error: ‘CONFIG_HZ’ undeclared (first use in this function)
In file included from /usr/include/linux/list.h:7,
from /usr/include/linux/wait.h:23,
from /usr/include/asm/semaphore.h:41,
from /usr/include/linux/sched.h:20,
from /usr/include/linux/module.h:9,
from nv-linux.h:28,
from nv.c:14:
/usr/include/linux/prefetch.h: In function ‘prefetch_range’:
/usr/include/linux/prefetch.h:64: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared (first use in this function)
In file included from /usr/include/linux/module.h:22,
from nv-linux.h:28,
from nv.c:14:
/usr/include/asm/module.h:60:2: error: #error unknown processor family
In file included from nv.c:14:
nv-linux.h:51:4: error: #error This driver does not support 2.6.x or newer kernels!
nv-linux.h:69:75: error: linux/tqueue.h: No such file or directory
In file included from /usr/include/asm/fixmap.h:27,
from /usr/include/asm/pgtable.h:17,
from /usr/include/linux/mm.h:36,
from /usr/include/linux/poll.h:11,
from nv-linux.h:74,
from nv.c:14:
/usr/include/asm/acpi.h:31:28: error: acpi/pdc_intel.h: No such file or directory
In file included from nv.c:14:
nv-linux.h:78:75: error: linux/wrapper.h: No such file or directory
In file included from /usr/include/linux/irq.h:21,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/asm/irq.h:16:25: error: irq_vectors.h: No such file or directory
In file included from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/linux/irq.h: At top level:
/usr/include/linux/irq.h:74: error: ‘CONFIG_X86_L1_CACHE_SHIFT’ undeclared here (not in a function)
/usr/include/linux/irq.h:74: error: requested alignment is not a constant
/usr/include/linux/irq.h:76: error: ‘NR_IRQS’ undeclared here (not in a function)
In file included from /usr/include/linux/irq.h:78,
from /usr/include/asm/hardirq.h:6,
from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/asm/hw_irq.h:28: error: ‘NR_IRQ_VECTORS’ undeclared here (not in a function)
In file included from /usr/include/linux/hardirq.h:7,
from /usr/include/linux/interrupt.h:11,
from nv-linux.h:79,
from nv.c:14:
/usr/include/asm/hardirq.h:13: error: requested alignment is not a constant
In file included from nv.c:14:
nv-linux.h:167:2: error: #error "Couldn't determine number of arguments expected by remap_page_range!"
In file included from nv.c:14:
nv-linux.h: In function ‘NV_SET_AMD_PAGE_ATTRIB’:
nv-linux.h:234: warning: initialization makes pointer from integer without a cast
nv-linux.h: In function ‘NV_CLEAR_AMD_PAGE_ATTRIB’:
nv-linux.h:243: warning: initialization makes pointer from integer without a cast
nv-linux.h: In function ‘NV_IRQL_IS_RAISED’:
nv-linux.h:255: warning: implicit declaration of function ‘__save_flags’
nv.c: At top level:
nv.c:39: error: array type has incomplete element type
nv.c: In function ‘nvos_probe_devices’:
nv.c:223: warning: implicit declaration of function ‘pci_find_class’
nv.c:223: warning: assignment makes pointer from integer without a cast
nv.c:277: warning: assignment makes pointer from integer without a cast
nv.c: In function ‘nvos_malloc_pages’:
nv.c:373: warning: implicit declaration of function ‘mem_map_reserve’
nv.c:386: warning: implicit declaration of function ‘mem_map_unreserve’
nv.c: In function ‘nvos_create_alloc’:
nv.c:439: error: invalid lvalue in assignment
nv.c:449: error: invalid lvalue in assignment
nv.c: In function ‘nvos_find_agp_by_class’:
nv.c:520: warning: assignment makes pointer from integer without a cast
nv.c:531: warning: assignment makes pointer from integer without a cast
nv.c: In function ‘init_module’:
nv.c:783: error: dereferencing pointer to incomplete type
nv.c:784: error: dereferencing pointer to incomplete type
nv.c:785: error: dereferencing pointer to incomplete type
nv.c: In function ‘nv_kern_vma_open’:
nv.c:922: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_vma_release’:
nv.c:956: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: At top level:
nv.c:1047: warning: initialization from incompatible pointer type
nv.c: In function ‘nv_kern_open’:
nv.c:1071: error: invalid lvalue in assignment
nv.c:1091: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c:1124: warning: passing argument 2 of ‘request_irq’ from incompatible pointer type
nv.c:1141: error: invalid lvalue in assignment
nv.c:1160: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_close’:
nv.c:1208: error: ‘CONFIG_HZ’ undeclared (first use in this function)
nv.c:1249: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_mmap’:
nv.c:1295: warning: implicit declaration of function ‘NV_REMAP_PAGE_RANGE’
nv.c:1416: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_ioctl’:
nv.c:1525: error: invalid use of undefined type ‘struct module’
nv.c: In function ‘nv_kern_isr’:
nv.c:1668: warning: implicit declaration of function ‘queue_task’
nv.c:1668: error: ‘tq_immediate’ undeclared (first use in this function)
nv.c:1669: warning: implicit declaration of function ‘mark_bh’
nv.c:1669: error: ‘IMMEDIATE_BH’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_rc_timer’:
nv.c:1693: error: ‘CONFIG_HZ’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_ctl_open’:
nv.c:1763: error: ‘MOD_INC_USE_COUNT’ undeclared (first use in this function)
nv.c:1772: error: invalid lvalue in assignment
nv.c: In function ‘nv_kern_ctl_close’:
nv.c:1828: error: ‘MOD_DEC_USE_COUNT’ undeclared (first use in this function)
nv.c: In function ‘nv_kern_read_cardinfo’:
nv.c:1903: warning: pointer targets in passing argument 3 of ‘rm_get_device_name’ differ in signedness
nv.c: In function ‘nv_get_phys_address’:
nv.c:2194: warning: passing argument 1 of ‘pmd_offset’ from incompatible pointer type
nv.c:2198: warning: passing argument 1 of ‘lowmem_page_address’ makes pointer from integer without a cast
nv.c: In function ‘nv_alloc_pages’:
nv.c:2250: warning: pointer targets in passing argument 5 of ‘KernAllocAGPPages’ differ in signedness
nv.c:2281: warning: pointer targets in passing argument 6 of ‘rm_alloc_agp_pages’ differ in signedness
nv.c:2309: error: invalid lvalue in assignment
nv.c: In function ‘nv_agp_init’:
nv.c:2637: warning: implicit declaration of function ‘inter_module_get’
nv.c:2638: warning: ‘inter_module_put’ is deprecated (declared at /usr/include/linux/module.h:572)
nv.c: In function ‘nv_start_rc_timer’:
nv.c:2761: error: ‘CONFIG_HZ’ undeclared (first use in this function)
make: *** [nv.o] Îøèáêà 1
{/CODE]
òàì íå áûëî êîíôôèãóðå, òîëüêî ìàêåôèëå
à âî âòîðîì àðõèâå NVIDIA_kernel-1.0-4365-unified.tar.gz
âîáùå òîëüêî 3 ôàéëà, íåèçâåñòíî ÷òî ñ íèìè äåëàòü è ÿ ïîäóìàë ÷òî îíè äëÿ óêðàèíöåâ, ò.ê. íà *.o
nvidia-enterprise.o
nvidia-smp.o
nvidia-up.o



ÿ íå ïðèóíûë, ïîíèìàþ ÷òî ÷åì áîëüøå ñëîæíîñòåé â ëèíóêñå âîçíèêàåò, òåì áîëüøå ìåíÿ ýòî çàâîäèò


òàê êàê ÿ ëàìî â ëèíóêñå, íè÷å íå ïîíÿë è òåïåðü îïÿòü âàñ áåñïîêîþ HELP ME HELP HELP!

âîò åùå ðèäìè îò âèäåîäðîâ, ïîæàëóéñòà ïåðåâåäèòå â êðàöèè















It is recommended to use YOU (YaST Online Update) for (re)installation
of the nvidia driver. There are several reasons for this. First, it's
simple. Second, and this is the most important one, you won't need to
recompile the nvidia kernel module after a kernel update.

Inside YOU enable "Installable and Installed Patches" for "Show Patch
Category" and select "Download NVIDIA® Graphics Driver" from the
patches list (usually at the bottom of the list). Note, that you need
to mark it as "Update" (right mouse click) if you already installed it
before and the driver was uninstalled - for any reason. Proceed as
usual now. After YOU has finished restart your Xserver (i.e. logout
from your Xsession) and you're fine.

People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YOU and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.
Update it - if not already done - via YaST2 Online Update (YOU).

2) Use the nvidia installer for 1.0-9746.

sh NVIDIA-Linux-x86-1.0-9746-pkg1.run -q

3) Configure X.Org with

sax2 -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
enabled, when the nvidia driver is running.

Èçâèíè, ñ âèäÿõîé âðÿäëè ïîìîãó.( À òåáå âîîùå çà÷åì äðîâà?
Çàëåé êóäà-íèòü öåëèêîì ôàéë /etc/modprobe.d/sound

Kusucha
1) Çâóê. Ïîïðîáóé íàáðàòü êîìàíäó èç ïîä êîíñîëè:

2) Âèäÿõà. Åñëè ÿ ïðàâèëüíî ïîíÿë, òî òåáå íóæíî óñòàíîâèòü èñõîäíèêè ÿäðà ñàìîãî ëèíóêñà "kernel-source". Òàêæå äîëæíû áûòü óñòàíîâëåíû ñáîðùèê "make" è êîìïèëÿòîð "gcc" (åñëè îíè íå óñòàíîâëåíû). Ïîñëå óñòàíîâêè èñõîäíèêîâ ïîÿâèòñÿ êàòàëîã /usr/src/~linux. À ïîòîì ñòàâü äðîâà.

Ðåêîìåíäóåòñÿ èñïîëüçîâàòü YOU (yast online update) äëÿ (ïåðå)óñòàíîâêè äðîâ. ÄËÿ ýòîãî åñòü íåñêîëüêî ïðè÷èí:
1å ýòî ïðîñòî
2å è ñàìîå ãëàâíîå - âàì íå ïðèéäåòñÿ ïåðåêîìïèëèðîâàòü ìîäóëè íâèäèà ïîñëå îáíîâëåíèÿ ÿäðà.
Ïîñëå òîãî êàê çàïóñòèëè YOU âêëþ÷èòå "Óñòàíàâëåâàåìûå è óñòàíîâëåííûå ïàêåòû"((?) íå ïîìíþ òàì òàêîãî...) äëÿ "Îòîáðàçèòü âñå êàòåãîðèè" è âûáåðèòå "Óñòàíîâèòü íâèäèà ãðàôè÷åñêèé äðàéâåð" èç ñïèñêà ïàò÷åé (çà÷àñòóþ â ñàìîì íèçó ñïèñêà.) Ó÷òèòå ÷òî âû äîëæíû ïîìåòèòü åãî êàê "Îáíîâèòü" åñëè ó âàñ óæå áûëè óñòàíîâëåíû äðîâà è îíè áûëè äåèíñòàëèðîâàíû. Çàòåì ïðîäîëæàéòå êàê îáû÷íî. Ïîñëå òîãî êàê YOU çàâåðøèò óñòàíîâêó, ïåðåãðóçèòå ÕÑåðâåð è âñå áóäåò êàê â ëó÷øèõ äîìàõ...

Íà ñàìîì äåëå ýòî âñå ÷òî òåáå íóæíî ñäåëàòü. ýòî íàèáîëåå ïðîñòîé è áåçîïàñíûé ïóòü.