Помогите люди! Не ставится драйвер Catalyst 8.3 версии.(до этого всё было нормально. Ставил на Висту х64, специально скачанный для неё). Ошибка такая: Установка драйвера: файл INF не найден.
Какая видеокарта? Где качал драйвера? Вот ссылка на драйвера Каталист 8.4 на оффсайте (для Виста 64х)):
2600ХТ от Сапфира.. 8.3 работали нормально до того как чёрт меня дёрнул их снести(не буду говорить причину..она здесь непричём). Качал ати-амд драйвера..сейчас качаю 8.4..но вряд ли помогут..
Более ранние версии на Висте не пробовал ..только на ХР..всё работало;)
Более ранние версии на Висте не пробовал ..только на ХР..всё работало;)
Проблема в том, что ИНФ-файл я видимо удалил из SysWOW64..может кто-нибудь кинет?
Все советы относятся к невозможности определить USB устройство (не может найти inf файл). Но может поможет:
Вариант 1. Через диспетчер устройств - "обновить драйвер", указать расположение вручную "C:\Windows\winsxs".
вольный перевод этого текста:
"1. In the Device Manager, expand the tree of Human Interface 2. Devices (HID).
3. Update the driver for all Unknown Device.
4. Windows Vista won’t be able to retrieve any driver online, as expected. So when prompted for how to search for driver software, select Browse my computer for driver software.
5. Enter or browse to C:\Windows\winsxs as the driver location and press the Next button.
If the system pops up a dialog warning about unsigned driver, allow the driver installation to
continue.
6. Windows Vista with SP1 will install the appropriate driver for the device, and the USB device should be able to work properly again."
Вариант 2.
Удалить из под администратора INFCACHE.1 в C:\Windows\inf, т.к. Vista не может его расшарить.
После удаления Vista найдет и восстановит драйверы большинства устройств.
перевод этой статьи:
"Normally Windows Vista can automatic detect USB device such as mouse, keyboard, video card, printer, sound car that is connected to computer’s USB port, and then try to install a valid driver for the device without user intervention. Most USB device can be used right away after a slight delay on first use when Windows needs to search and install the driver, and almost instantly subsequently.
However, in some system, when user plug in a new plug and play USB device such as mice, keyboard, card reader, USB key, and storage device such as flash drive, key or card reader that use the universal mass storage driver, Windows Vista will pop up message that no driver found for you device, and asking the user to insert a driver CD or opt to browse for a driver software for the USB storage device. Most of these USB devices supposedly to be of plug-and-play nature, which can be auto installed on other system.
When the user select C:\Windows or C:\Windows\inf folder for Windows Vista to look for driver for the USB device, a valid driver will eventually be found. Why Windows Vista unable to locate the driver automatically is puzzling. To make matter worse, for USB storage device, each device will need to install several driver to function and work properly. For example, driver for the hardware itself, for the storage, and for the generic volume. Thus user will have to manually select and install the driver for the USB storage device 3 times in order to use it, and for each of the USB device inserted.
The problem is caused by a corrupted INFCACHE.1 file, which stores and caches the location of drivers and their INF files. The INFCACHE.1 file is restricted access file as it’s located in \Windows\inf folder. If the Infcache.1 file is deleted or corrupted, Windows Vista does not re-create the Infcache.1 file. So, deleting INFCACHE.1 away will allow Windows Vista to re-create and rebuild the INFCACHE.1 file the next time Windows searches for drivers.
To delete INFCACHE.1 file, user have to has the Full Control permission and ownership on the file. You can choose to rename if you want to be on the safe side. If the UAC prompt for administrator’s password or permission, enter administrator’s password and click Continue button to delete the file away.
Once deleted INFCACHE.1, Windows Vista would be able to automatically search and install the driver for most common USB device."
Вариант 1. Через диспетчер устройств - "обновить драйвер", указать расположение вручную "C:\Windows\winsxs".
вольный перевод этого текста:
"1. In the Device Manager, expand the tree of Human Interface 2. Devices (HID).
3. Update the driver for all Unknown Device.
4. Windows Vista won’t be able to retrieve any driver online, as expected. So when prompted for how to search for driver software, select Browse my computer for driver software.
5. Enter or browse to C:\Windows\winsxs as the driver location and press the Next button.
If the system pops up a dialog warning about unsigned driver, allow the driver installation to
continue.
6. Windows Vista with SP1 will install the appropriate driver for the device, and the USB device should be able to work properly again."
Вариант 2.
Удалить из под администратора INFCACHE.1 в C:\Windows\inf, т.к. Vista не может его расшарить.
После удаления Vista найдет и восстановит драйверы большинства устройств.
перевод этой статьи:
"Normally Windows Vista can automatic detect USB device such as mouse, keyboard, video card, printer, sound car that is connected to computer’s USB port, and then try to install a valid driver for the device without user intervention. Most USB device can be used right away after a slight delay on first use when Windows needs to search and install the driver, and almost instantly subsequently.
However, in some system, when user plug in a new plug and play USB device such as mice, keyboard, card reader, USB key, and storage device such as flash drive, key or card reader that use the universal mass storage driver, Windows Vista will pop up message that no driver found for you device, and asking the user to insert a driver CD or opt to browse for a driver software for the USB storage device. Most of these USB devices supposedly to be of plug-and-play nature, which can be auto installed on other system.
When the user select C:\Windows or C:\Windows\inf folder for Windows Vista to look for driver for the USB device, a valid driver will eventually be found. Why Windows Vista unable to locate the driver automatically is puzzling. To make matter worse, for USB storage device, each device will need to install several driver to function and work properly. For example, driver for the hardware itself, for the storage, and for the generic volume. Thus user will have to manually select and install the driver for the USB storage device 3 times in order to use it, and for each of the USB device inserted.
The problem is caused by a corrupted INFCACHE.1 file, which stores and caches the location of drivers and their INF files. The INFCACHE.1 file is restricted access file as it’s located in \Windows\inf folder. If the Infcache.1 file is deleted or corrupted, Windows Vista does not re-create the Infcache.1 file. So, deleting INFCACHE.1 away will allow Windows Vista to re-create and rebuild the INFCACHE.1 file the next time Windows searches for drivers.
To delete INFCACHE.1 file, user have to has the Full Control permission and ownership on the file. You can choose to rename if you want to be on the safe side. If the UAC prompt for administrator’s password or permission, enter administrator’s password and click Continue button to delete the file away.
Once deleted INFCACHE.1, Windows Vista would be able to automatically search and install the driver for most common USB device."
Всё тему можно прикрыть..не знаю каким образом, но 8.4 установились нормально:)
ЗЫ: Удалял долго и мучительно старые дрова..через Безопасный+ ГУРУ+Регорганайзер(вручную)..Но всё равно мне кажется абсолютно чище не стало..ну и бог с ним..
ЗЫ: Удалял долго и мучительно старые дрова..через Безопасный+ ГУРУ+Регорганайзер(вручную)..Но всё равно мне кажется абсолютно чище не стало..ну и бог с ним..
Такая же щас проблема возникла только с дровами 8.11 Ати каталист,Windows Vista SP1 =)
Чет видимо нахимичил удалил INFCACHE.1, поставил дравину на дисплей, потом снес все драйвера,и хотел обратно поставить.но к сожалениею файла ИНФ опять нету.
Щас думаю пересавить ОС
Чет видимо нахимичил удалил INFCACHE.1, поставил дравину на дисплей, потом снес все драйвера,и хотел обратно поставить.но к сожалениею файла ИНФ опять нету.
Щас думаю пересавить ОС
Doberm@n,
Попробуй моим путём из поста 7-го...
Попробуй моим путём из поста 7-го...
SoftoRooM © 2004-2024