Спецы по Apache,все сюда!!!

ZimbI4, 14.03.2007 - 19:58

Ребят,такое дело при старте апача выдаётся такая ошибка

на скока я понял связано с тем что порт 80 занимает какая-то прога,но я не пойму какая?????????Мож есть другие версии,помогите плизз!!!

yah, 14.03.2007 - 21:03

А что стоит в конфигах апача прописать другой порт и попробовать запустить на другом порту?

de1ay, 14.03.2007 - 21:54

На 80ом порту имеют особенность работь браузеры. Попробуй вырубить браузер и запустить апач. Либо netstat и смотреть открытые порты

ZimbI4, 14.03.2007 - 23:41

Нетстат уже пробовлал но не видел там портов 80 вот скрин

de1ay, 15.03.2007 - 0:12

Тогда ноги в руки и в конфиги апача, переноси его на другой порт

ZimbI4, 15.03.2007 - 8:29

Я нашёл прогу которая сидела на 80,прикинте это был скайп,лан вообщем с этим рразобрались!!!!!!Теперь бробла когда захожу через браузер,на сваой айпи,то мне выдаётся вот что phpinfo();
?>,хоя долже показывать инфу:PHP Version 5.2.1

System Windows NT MACHINE 5.1 build 2600
Build Date Feb 7 2007 23:10:31
Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--with-gd=shared"
Server API Apache 2.0 Handler
Virtual Directory Support enabled
Configuration File (php.ini) Path D:\WINDOWS
PHP API 20041225
PHP Extension 20060613
Zend Extension 220060519
Debug Build no
Thread Safety enabled
Zend Memory Manager enabled
IPv6 Support enabled
Registered PHP Streams php, file, data, http, ftp, compress.zlib
Registered Stream Socket Transports tcp, udp
Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, zlib.*

Zend logo This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.2.0, Copyright © 1998-2007 Zend Technologies,чё делать?

de1ay, 15.03.2007 - 8:42

Не стоит ли у тебя Zend?

ZimbI4, 15.03.2007 - 8:52

Нет,я собирался сделать звязку апач и пхп.!!!!!

de1ay, 15.03.2007 - 9:02

Успокойся и скажи, что он у тебя выдаёт? По твоему оформлению разобрать, что где - нереально.

ZimbI4, 15.03.2007 - 9:41

Лан,я установил апач и пхп,потом конфиг малец поправил,и защёл в браузер на http://свой айпи/ и мне там выдл на странице воть что:
phpinfo();
?>
но я предварительно создал индекс фаил для пхп и в нём ввёл написаннное:
phpinfo();
?>

yah, 15.03.2007 - 10:05

пропиши в конфиге апача такие строчки:

ZimbI4, 17.03.2007 - 21:28

Ребят просьба!!!!Вы бы не могли выложить мануэл по созданию сайт со связкой апач и пхп,плиззз,а то у мия так ни чё и не вышло!!!!Плиииизззз,Я такой человек мне Надо разжувать,и думаю мануэл кокрас то что мне поможет!!Плиииззз!!!

yah, 17.03.2007 - 22:26

Объясняю на пальцах:
1. Почитай про Апач это:
https://softoroom.org/...2%EA%E0+apache

2. Затем это:
https://softoroom.org/...2%EA%E0+apache

3. Еще это:
http://far.h1.ru/serv/apache/winnt.html

4. Установи Апач
5. Настрой его. (Как это сделать? См. п.1-3);
6. Скачай инсталлятор php отсюда:
http://ru.php.net/get.../from/a/mirror

(я устанавливал пхп в папку d:\usr, а апач был в папке D:\usr\Apache\Apache2, в п. 1-3 это все описано).

7. Самое главное, ПИШИ НОРМАЛЬНО !, а то на "такое" тебе никто не ответит.

kokv, 18.03.2007 - 10:07

Слышал есть еще Апач - Точно не помню но вроде -" набор джентлемена" и он уже укомплектован всем необходимым.
Кто в курсе - отпишите что к чему

de1ay, 18.03.2007 - 10:41

http://www.denwer.ru/

ZimbI4, 18.03.2007 - 23:26

Так всё пишу нормально!!!Ребят всё сделал как надо,то есть по инструкции.Поставил апач и пхп,вроде апач работает и когда делаешь html файлы тож всё ок!!!!пхп сел на апач но пхп не работает,так как когда захожу
http://localhost/index.php ,то он ничё не пишет!

yah, 19.03.2007 - 0:18

Вообще ничего? Ты index.php куда закинул? ПХП через инсталлятор устанавливал? Там в конце инсталлятор должен был предложить внести изменения в конфиг апача...

ZimbI4, 19.03.2007 - 11:35

Я всё сделал,а индекс пхп в папку сайта пихнул DocumentRoot "D:/www",ребят счас подробно опишу свои действия:
1.Установил апач (apache_2.2.3-win32-x86-no_ssl) в папку D:/usr/Apache,правил конфиг по ссылкам,которые ты мне дал(Большое спасибо!!!).В трее от апача перо с зелёным треугольничком в середине.
2.Ставлю пхп,скачал по твоей ссылке(Большое спасибо!!), D:/usr/PHP,создаю фаил индекс(phpinfo();
?>) пхп и кидаю его в папку D:/www.
Пытаюсь запустить
http://localhost/index.php и всё.....

yah, 19.03.2007 - 11:41

Кинь на форум содержание httpd.conf

ZimbI4, 19.03.2007 - 13:44

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.2/> for detailed information.
# In particular, see
# http://httpd.apache.o...tives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "D:/usr/Apache" will be interpreted by the
# server as "D:/usr/Apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild 0

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "D:/usr/Apache"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
#
ServerAdmin @

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName мой ип

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "D:/www"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#

Options Indexes Includes
AllowOverride All


#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#

Options Indexes Includes
AllowOverride All
Order allow,deny
Allow from all


#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#

DirectoryIndex index.html index.htm


#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#

Order allow,deny
Deny from all


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn


#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common


# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio


#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined



#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://мой ип/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "D:/usr/Apache/cgi-bin/"



#
# "D:/usr/Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#

AllowOverride All
Options ExecCGI


#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:

#!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
#

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi .bat .exe .cgi .pl

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml


#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://мой ип/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#

SSLRandomSeed startup builtin
SSLRandomSeed connect builtin

AddHandler server-parsed .shtml .shtm .sht .html .htm

#BEGIN PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL
PHPIniDir "D:\\usr\\PHP\\"
LoadModule php5_module "D:\\usr\\PHP\\php5apache2_2.dll"
#END PHP INSTALLER EDITS - REMOVE ONLY ON UNINSTALL
AddType application/x-httpd-php php phtml php3 php4 php5 phtml

yah, 19.03.2007 - 16:20

Замени кусок


На


И в папке D:\usr\Apache\Apache2\conf найди файл mime.types и добавь в него


Да, и не забудь, после того, как сохранишь изменения, перезапусти апач

ZimbI4, 19.03.2007 - 21:45

Всё сделал,но чёт результатов нет!!!

ZimbI4, 22.03.2007 - 9:07

А мож стоит переустановить винду???может быть чо пробала в неё!!!?

yah, 22.03.2007 - 10:36

Попробуй установить апач 2.0.*

virgo, 2.04.2007 - 13:07

удаляй **** всё что наставил и дуй сюда
http://php-myadmin.ru...ent-intro.html - установка php+apache+mysql+phpmyadmin
Разжёванней некуда. Если что пиши 218582603

Активные ссылки запрещены, как и мат. Читаем правила. Предупреждение.