сканер локальной сети, fast universal IPv4-IPv6 scanner
Дата публикации:
geronima, 3.04.2008 - 17:04
SoftPerfect Network Scanner
описание (rus)SoftPerfect Network Scanner Перед вами довольно функциональный и очень удобный в использовании Интернет сканер. Работает с разными протоколами и стандартами. Конечно может проводить сканирование по заданному IP адресу, можно проводить сканирование по SNMP - это известны протокол сетевого администрирования, в наши дни он довольно часто встречается и входит в стек протоколов TCP/IP. NetBIOS - это неплохой стандартный сетевой интерфейс. Итак, суть утилиты в том, что после ее установки, запуска и запуска процесса сканирования, она будет отсылать специальные звуковые сигналы на компьютеры, далее можно провести сканирование на прослушивание протоколов TCP, далее вам будет доступна информация о том, какие виды или ресурсы в сети используются одновременно. SoftPerfect Network Scanner поможет пользователям также установить, используются ли сетевые дисковые накопители совместно, далее их можно будет просматривать в стандартном проводнике Windows, а полученные данные можно будет фильтровать. Утилита довольно легко может определить заданный пользователям порт, если он окажется открытым, вам сразу будет доступна эта информация, после программа определит имя хоста и в автоматическом режиме обнаружит ваш локальный диапазон IP. SoftPerfect Network Scanner не нуждается в установке, может запускаться с носителей любых типов, вроде как не оставляет следы пребывания в системе. Внутри архива вы найдете версии как для 32 так и для 64 битной системы, соответственно думаю каждый выберет сам, что ему нужно. В целом работать с программой не так и сложно, хоть и нет Русской поддержки, возможностей у нее не огромное количество, надо просто разобраться с тем, что вы хотите от программы, а уже остальное приложится. SoftPerfect Network Scanner умет пинговать нужные адреса и отображать информацию доступности о них. Можно обнаруживать аппаратные MAC адреса даже через маршрутизаторы, позволяет отображать ваш внешний и внутренний IP адрес, может находить скрытые папки, с этой утилитой можно достаточно просто изучать сетевые ресурсы. SoftPerfect Network Scanner ведет по всем действия отчеты, вы сможете экспортировать их в HTML, TXT. CSV форматы, имеется и поддержка Wake-On-LAN - то есть возможно удаленно отключать компьютеры. description (eng)SoftPerfect Network Scanner is a fast universal IPv4/IPv6 scanner with an extensive range of options and advanced features for system administrators and general users interested in computer security. This powerful program can ping computers, scan ports, discover shared folders and comes with flexible filtering and display options. It can retrieve practically any information about network devices via WMI, SNMP, HTTP, SSH and PowerShell.
In addition, it can scan for remote services, registry, files, performance counters and so on. The results can be exported to a variety of formats from XML to JSON. Key features
Performs a ping sweep and displays live devices. Fully supports both IPv4 and IPv6 discovery. Detects hardware MAC-addresses, even across routers. Detects hidden shared folders and writable ones. Detects internal and external IP addresses. Scans for listening TCP ports, some UDP and SNMP services. Retrieves currently logged-on users, configured user accounts, uptime, etc. Supports remote SSH, PowerShell and VBScript command execution. Launches external third party applications. Exports results to HTML, XML, JSON, CSV and TXT. Supports Wake-On-LAN, remote shutdown and sending network messages. Retrieves any system information via WMI, remote registry, file system and service manager.
What's New in version 4.2: Added remote registry scan. The application can connect to the remote registry of remote PCs running Windows and retrieve useful information. Added remote file scan. Likewise, provided the administrative shares are enabled and accessible, you can pull out information about a specific file on remote computers.
Maximum possible number of threads raised up to 1000. Implemented Drag-n-Drop to rearrange MIB OIDs in the SNMP OID manager. Added Mark All/None button in registry and remote file scan. Default items are initially unmarked.
Showing friendly names in the Wake-on-LAN manager if mapping MAC-to-friendly name is turned on. Option to load initial configuration. Several usability enhancements (hotkey to start scan, sort/copy/paste in friendly names, etc). User-prompt parameters in third-party applications. All actions can now be launched against multiple computers at once.
Added assigning friendly names to MAC addresses in the WOL manager. Added parsing colon-separated MAC addresses in addition to dash-separated. Added hibernate and suspend commands in addition to power off. Dead hosts and those gone off-line are drawn in gray for better readability. Added option to leave host information shown when it goes off-line. MAC address is now discovered and shown prior to other slower lookups. Faster termination of live display threads on rescan and shutting the application down. Filtered resultsets can now be saved excluding items not shown. Windows 95, 98, ME and NT are no longer officially supported.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Fixed incorrect SNMP uptime retrieval when a target host has been running over 100 days. • Fixed incorrect SNMP string display where an ASCII string containing CR/LF was represented as a hex sequence. • SNMP uptime column is now sorted properly as a number, not as string. • Added multirange IP scan support (several different subnets can be scanned at once).
• Added live display log showing computers joined and left the network. • Fixed incorrect saving of multiple TCP ports, broken bookmark management and a few other minor issues. • Improved WOL manager that allows to specify a custom IP/port for each wake-up target.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Shared resources are no longer automatically exported unless specified explicitly with the /cols switch. • Added auto-open the most recent file option. • When launching a third-party application bring up the elevation prompt where necessary. • Added noncontiguous IP address range scan mode (see help for details). • Added monitor vendor, model and serial number retrieval.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Now using a different method to obtain a list of authorised DHCP servers from AD. This should eliminate an obscure crash when doing DHCP discovery. • Showing a list of all AD-authorised DHCP servers under replied DHCP servers. • Added support for multiple communities within a single SNMP query. • Added an option to display replied community when for a SNMP query. • Added a few more default WMI queries to retrieve system part number, model name, serial number and asset tag. • Filter now applies to off-line devices as well (previously applied to on-line devices only).
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Fixed failure to discover DHCP servers on a Windows Vista/7 multihomed machine. • Entries in the WOL manager can now be edited via a popup menu. • Added sorting bookmarks by column header click.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added the /file command line switch to source a set of IP addresses to scan from a file. • Fixed DHCP discovery as it failed to reuse a port if it has already been allocated to another process. • Improved WMI query builder performance when retrieving class example values.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added /load command-line switch to load and optionally rescan a XML resultset. • Added options to play a sound and launch a program in the live log. • Added menu items to copy and save items from the live log view. • SNMP query now takes into account ping timeout and retry count. This should speed up SNMP queries against not responding devices.
» Нажмите, для открытия спойлера | Press to open the spoiler «
•Improved File - Import IP Address List command. It now understands IP address ranges and address/mask notations. •Fixed failure to load a configuration file passed via command line if any other additional switch was present. •Not using user name and password when sending a WMI query to the local host. •Added UDP port scan for network time protocol (NTP) listeners. •Added Universal Plug and Play device discovery that detects UPnP compatible devices in your network.
» Нажмите, для открытия спойлера | Press to open the spoiler «
•Added a separate option to determine shared folders free and total disk space. •Added logging live display events to a file with all active columns contents logged. •Added passing live log columns values to a third-party application launched upon events. •Added minimisation to the notification area. •Added handling of SNMP exceptions previously reported as unknown type.
» Нажмите, для открытия спойлера | Press to open the spoiler «
•Disabled registry redirection so that on 64-bit Windows systems a 64-bit registry view is read. •Added arranging user-defined applications. •It is now possible to specify a URL as a user-defined application. •It is now possible to pass values containing braces, e.g. a GUID to third-party applications. •Added substitute variables to have date/time values in output file name. •Respecting columns order specified in the /cols command-line switch. •Added a HTTP banner grabbing feature to quickly identify web-server software.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added SMB protocol probe that improves reliability when resolving host name, domain membership, remote time and OS type. • Fixed reading REG_MULTI_SZ values from the registry that ended up with garbled characters. • Added decoding and displaying WMI arrays rather than just displaying "Array". • Added namespace support for WMI, so that namespaces other than CIMV2 can be used. • Added thread max run-time parameter to gracefully terminate stalled threads. • When the live display is enabled it now also comes on after rescanning a loaded file.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added 64-bit build. Now the application comes in 32-bit and 64-bit versions. • Added using NetBios when looking up server roles if available. • Fixed positioning application on an auxiliary monitor. • Added even/odd row colouring and filter matches highlight.
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added an option to save login info in shutdown and suspend dialogs. • Added local and global group membership discovery. • Fixed populating 10th column when multicolumn queries are used. • Added rearranging objects with drag and drop (WMI, SNMP, services, files and registry entries).
» Нажмите, для открытия спойлера | Press to open the spoiler «
* Fixed invalid pointer operation when interrupting scan with the /auto switch. * Fixed saving third-party applications and other Base-64 encoded data to INI file. * Added wildcards support to the remote file discovery.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added network messaging via terminal services API. • Added auto-resize columns on header divider double click. • Added a watchdog timer that kills stalled threads when max run-time is set. • Added on demand forced thread termination. • Added global variables support for third-party applications.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added asynchronous TCP port scanning as it's much faster than previous implementation. • Sending WOL packet to a broadcast address now works correctly on multihomed machines. • Sets of TCP ports can now be grouped and have a description. • Allowed the same user-prompt parameter to be repeated more than once when launching third party applications.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added showing number of selected computers. • Fixed uptime retrieval for Vista and certain Windows Server editions. • Added default parameters for user prompts. • Added compact view for multiple IP address range input.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added folder size retrieval on remote shared folders. • Added vendor-specific XML retrieval via HTTP and parsing. • Added random scan order feature (deceiving IDS/firewalls). • Grabbing HTTP banner from ports 80, 443 (HTTPS), 3128 and 8080.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• SNMP community string and additional target routers made configurable in MAC address lookup. • Added UDP port 137 NetBios Name Service (NBNS) discovery. • Added a user warning when launching a command against hidden selection. • Added nested custom applications (menu items can be grouped and nested). • Added noncontiguous range interpretation to the /range parameter. • Added appending bookmarks to the current address range when Ctrl is held. • Non-ASCII characters in SNMP response string displayed as binary. • Respect user column order when copying entire line or saving to a file. • Added /maxcols command line switch.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added bookmark drag-n-drop in the bookmark manager. • Added a warning if closing the application while scan is in progress. • Added automatic saving to the most recent file in addition to automatic load. • Fixed passing parameters in double braces when no user-prompted parameters were present.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Added packet loss and ping jitter aka packet delay variation testing. • Added attaching to console and printing progress when running in the hidden mode. • Added full SNMPv3 support and user-selectable SNMP version to use.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
• Added automatic OUI.txt downloading and updating for NIC vendor lookup. • Added reading registry via WMI if the Remote Registry service is not available. • Added domain names displayed with user names in local group membership query. • Added detecting external IP address from LAN address detection dialog. • Fixed reading EDID monitor info via the Remote Registry service. • Fixed freeze when launched from a task scheduler via a batch file.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
* Added menu items for nested bookmarks to apply bookmarks as a group. * Added showing the contents of a regex capture group rather than a match itself. * Added basic HTTP authentication support for Remote XML to access protected devices. * Fixed stripping control characters that could leak into columns. Improved saving columns.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
2015-11-17 6.0.9 • Added showing column visibility setup if no columns are visible. • Added using GET method instead of HEAD for grabbing HTTP banners. • Added a CIDR-to-range button to change address range representation. • Added highlighting new devices found in live scan and scan for new devices. • Added all/v4/v6 options for the /range switch to enable automatic detection. • Fixed an Invalid Pointer Operation error when using live display for a long time. 2015-09-20 6.0.8 • Added CIDR notation input for IPv4 and IPv6 in addition to ranges. • Added parsing of IPv4 and IPv6 CIDR notation in IP/Hostname import. • Added Remote PowerShell support to run scripts on remote computers. 2015-07-19 6.0.7 • Added an option to allow ARP outside current subnet. • Added adapter name in the auto detection dialog. • Added official Windows 10 support.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
6.1.2 • Added the Remote SSH feature to execute commands in a shell. • Added JSON support on command line to enable export to JSON.
6.1.1 • Added support of host names as a target in the WOL manager. • Added measuring round trip time for ARP-discovered devices. • Added an option to show succeeded ping type, i.e. ICMP or ARP. • Fixed text export output with aligned space-padded columns. • Fixed occasional empty MAC addresses shown in the output. • Fixed a crash if the config was corrupted, instead recreate it.
6.1 • Added probing UDP ports 1434-MSSQL and 1812-RADIUS. • Fixed occasional empty MAC addresses shown in the output. • Fixed painting the progress bar to make the resize grip visible. • Fixed indicating progress when rescanning a specifc column on selected devices. • Fixed minimised launch and respecting the Minimise to the Notification Area setting. • Fixed asking to download the service mapping DB when the TCP port scan option was turned off.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
2016-04-06 6.1.5 • Added choosing what columns are retained when a device goes off-line. • Added extracting serial and model from EDID descriptors in monitor info. • Added a PowerShell option that allows not to load the current user's profile. • Added showing how long a device has been on-line/off-line under Last Scan Time. • Fixed a crash message if a device was deleted from the main view while scanning.
2016-03-21 6.1.4 • Added combined option not to scan network and broadcast addresses. • Added a progress bar when checking if device is up on launching a command. • Added showing current config name in the title bar when using an external file. • Added optional comment field to each user name in the credential manager. • Added an option to show the bookmark name that displayed IP address falls into. • Fixed maintaining row order when copying to the clipboard and creating a batch file. • Fixed string sorting in columns, which also fixes reporting TCP port numbers in order. • Fixed Live Display handling of a CIDR adress range as wrong addresses were scanned. • Fixed issues in UI: remote items selection, use the "device" term instead of "computer". • Changed logged-on user retrieval from Win32_LoggedOnUser to Win32_ComputerSystem.
2016-02-29 6.1.3 • Fixed a PSCredential authentication error in Remote PowerShell. • Fixed WMI parser that failed on statemements containing the WHERE clause. • Fixed Live Display and Rescanning when duplicate IP addresses were present. • Added getting a list of logged-on users via WMI if all other methods fail. • Added automatic encoding detection when parsing a HTML page in Remote XML. • Added a new Rescan option to rescan both listed and undiscovered computers. • Added a Scan Comparison tool to highlight differences between any two scans.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
(2016-09-04) 6.1.9 • Added create/modify/access time retrieval in Remote Files. • Added getting host names from a DNS server for offline nodes. • Fixed quoting variables if those are used within quotes already. • Fixed the tab key to go through filters in addition to IP editors.
(2016-05-20) 6.1.7 • Added installation package as a form of distribution in addition to the portable build. • Added workaround for using Win10Pcap in duplicate IP finder due to an incompatibility. • Added /openpass command line switch to reveal stored passwords within the UI. • Added downloading sanitised OUI.TXT from LinuxNet.CA rather than the IEEE web-site. • Fixed initialisation of NIC and port databases if they were enabled just before rescan.
(2016-04-28) 6.1.6 • Added a last-seen time column similar to what previously was scan-time. • Added showing adapter name next to responses received from DHCP servers. • Fixed taking filter into account when automatically saving to the MRU file.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Added Remote JSON feature for retrieving and parsing JSON responses from network devices. Added access to Redfish Scalable Platforms Management built on top of Remote JSON. Added Portuguese (Brazil) as a supported UI language.
Added a configurable delay between live display rescan rounds. Added a setting to show filtered/online/offline devices in the status bar. Added a MIB browser for easy OID selection in SNMP queries. Added official Windows Server 2019 support.
Improved: virtual columns can now be used as keys for mapping friendly names. Improved: expanded live notifications to four types (online, offline, new MAC, changed IP). Added: custom sender e-mail in e-mail settings. Added: draw configured background colour and text colour in column headers. Improved: retain column metadata and width when changing multi-column items. Improved: make output of scripted columns available to scripts themselves. Improved: MAC address resolution via SNMP: added SNMPv2c and IPv6 address support. Improved: up to 50 columns of each type (previously 10). The /maxcols switch removed. Improved: when rescanning a column in multi-column group, limit rescanning to that column. Added: drag-n-drop of computers from Windows Explorer under Network icon to main view.
Added: multiline display mode for long strings. Added: incremental search across output columns. Added: process class in scripting for handling output of console applications. Added: integration with Nmap with OS detection, vulnerability scans and much more. Setup + Portable
Added: quick filter in friendly names, bookmarks and display filters. Added: secure WMI connection support to access restricted namespaces. Improved: downloading mappings file OUI.TXT for NIC vendor lookup. Fixed: columns lost hidden status when their settings were changed. Fixed: crash when closing and aborting scan and Live Display was on.
Fixed: column regex was not used when referring to scripting columns from a script. Fixed: trailing commas are no longer wrriten to a CSV file at the end of each line. Added: a button in the save dialog to choose exported columns for text, CSV and HTML. Added: variables %0 (IP address) and %1 (MAC address) whose bytes can be used in SNMP OID. Added: built-in SNMP scripting object for custom queries to any SNMP-capable device. Added: mDNS and SNMP are used to resolve device names if anything else fails. Added: full UTF8 support in SNMP replies can now handle non-ASCII characters.
Added: searching alternate paths in remote registry wildcard queries. Added: built-in registry browser for quick path and parameter lookup. Added: a navigator under Help menu to quickly find a setting or command. Improved: new system-independent implementation to access HTTP and HTTPS. Improved: suppress messages about domain resolution when using command line.
Added: new repetitions display settings: As Is, Fold and Hide. Added: AES-192 and AES-256 ciphers support in SNMPv3. Fixed: occasional erroneous characters in OIDs fetched via SNMP. Fixed: occasional division by zero error during data retrieval via SNMPv3. Changed: Windows 7 is now the minimum required OS version.
Added: wildcard support in Equal/Not Equal filters. Added: new regex filter for advanced filtering of results. Added: new menu item to remove all inactive devices at once. Improved: discovered devices can now be deleted during scanning. Improved: a number of smaller enhancements in the user interface.
Added: quick search for devices in WOL manager. Added: host name auto-collection in WOL manager. Improved: startup time and overall scan performance. Fixed: controls misalignment on high resolutions. Fixed: crash caused by live display log pointing to an invalid location.
Added: SNMPv3 support in router MAC address discovery. Added: option to include/exclude ports in Nmap scans. Added: new menu for creating instant filters from results. Improved: apply active filter during scanning as well. Fixed: shares vanished when saving and excluding unrelated columns.
Added: macOS support, the application is now almost entirely cross-platform. Added: new SMB library for accessing shared folders independently of Windows API. Changed: new JSON, XML and regex parsers may use slightly different expression syntax. Changed: significant internal changes and optimisations, faster application start and operation.
Added: dark theme support on Windows 10/11. Improved: displaying new device count in icon overlay. Improved: reading installed apps from 32-bit registry. Fixed: missing V3UserName in SNMP script object.
Added: custom regular expression patterns for matching and highlighting the data displayed in columns. Added: the ability to set and clear custom row highlighting for faster distinguishing of important information displayed in rows. Added: credentials tags for efficient identification and use of saved credentials in scripts and external applications. Improved: redesigned credential manager, with added columns and sorting functionality. Improved: Network Scanner EXE files are now dynamically based, which ensures their compatibility with Data Execution Prevention (DEP). Fixed: index of bounds error and subsequent crash that occurred at re-scanning of a single column. Fixed: incorrect MAC addresses that were displayed when scanning external subnets.
Added: users can now link associated data to MAC or IP addresses, such as device location and asset tag, to aid in tracking and management. Improved: importing previously exported data has been improved with a choice of merge with, append to, or replace existing data. Improved: several minor user interface elements have been redesigned to enhance the user experience and streamline workflows.
Added: scan progress bar for each IP address. Added: pending operation time in device properties. Improved: dark mode appearance on Windows. Fixed: sorting by remote time due to time-zone string.
Added: Linux support. Added: ARM64 architecture support. Added: Search functionality within settings. Added: Geolocation capabilities for public IP addresses. Improved: Extended error information for failed WMI logins. Improved: Warnings about non-writable locations in portable Windows builds. Improved: Access to bookmarks and dynamic menu items in the navigator.
Added: User-configurable toolbar. Added: Column grouping for enhanced main view organisation. Added: Splitting of multi-value cells into rows in CSV and TXT exports. Added: Direct access to multi-value column entries in device properties. Added: New PowerShell, SSH and WQL editors with highlighting and execution features. Improved: Multi-value cells are now marked with an icon for quick recognition. Improved: Double-click functionality on multi-value cells for viewing contents as a list.