Далеко не каждый может точно ответить на вопрос, какой у него компьютер. Но в некоторых случаях знать это просто необходимо. Программа System Information Viewer поможет собрать все данные о ПК, включая сведения о процессоре, памяти, жестких дисках, приводах, модемах, USB-устройствах и о многом другом. При помощи программы можно наблюдать за тем, как расходуются системные ресурсы при работе с разныи приложениями. Она в реальном времени показывает сколько памяти свободно на данный момент, как используется файл подкачки и т.д. Еще одна интересная возможность – вывод сведений обо всех компьютерах, которые находятся в локальной сети. System Information Viewer покажет, сколько установлено оперативной памяти, какая модель процессора установлена на каждом из них, а также какая операционная система. В последней версии добавлена поддержка Intel Core 2 Quadro (Kentsfield) и Intel Xeon Quad Core (Clovertown), обновлен модуль System Management BIOS, исправлена ошибка определения процессора Pentium D (Presler и Cedar Mill). На скриншоте понятно что она показывает абсолютно всё..Нажмите "Увеличить" для детального просмотра.
Updated the -SAVE file to include the match names and added lots of new match names to allow better selection of information. Updated [Sensors] to allow for fans stopping, added specific support for several motherboards and changed -MONITOR to use the CPU VID and DTS when supported. Added the [Wi-Fi] page to dynamically lists the Wi-Fi SSID, Signal Strength, Channel, Frequency, Radio Type, Authentication, Cipher and MAC Address. Note that on Windows XP systems the Wireless LAN API for Windows XP Service Pack 2 hotfix needs to be installed and your host adapter driver need to support Native Wi-Fi. Enhanced the [Adapters] page to dynamically update. More information is reported if SIV is fails to start it's device driver service.
Added initial support for the Intel X48, 5400A and 5400B Chipsets. Added the [Mapping] page which shows the mappings from Disk Drives to Volumes. Added persistent -DELL and -NODELL qualifiers to Enable and Disable the use the Dell BIOS Sensor interface. The default state is -NODELL. Improved reporting of Dual-Core AMD Opteron 2218 (Santa Rosa), Turion 64 X2 Mobile TL-60 (Trinidad) and similar CPUs.
Updated SIV for Windows Server 2008 RTM and Windows Vista SP1 RTM. Updated to use Windows Vista SP1 WDK (6001.18000) for SIV the Drivers. Update for the latest (December 2007) Intel® Processor Identification and CPUID Instruction application note (AP-485). Restored sensor reporting for the Winbond W83781D and similar sensors that do not have an LPC I/O interface.
О программе: Программа нового поколения, раскроет всю основную информацию о компьютере. Разработанная специально для операционных систем семейства Windows Vista™ и XP, определяет самую точную информацию об операционной системе, RAM, процессоре (CPU), BIOSe, материнской плате, видеокарте и дисков в системе, также уникальная система рейтинга выставляет оценку памяти, процессоре и видеокарте, определяет совместимость с новой ОС. Вкладка память оснащена специальным плавающим окошком, которое в реальном времени позволяет отслеживать загрузку физической памяти.
SIV (System Information Viewer) 3.35 1.24 МБ, XP/2K3/Vista
Added support for Intel Xeon (Gainestown) and Intel Atom Dual-Core (Diamondville) processors. Added support for the Intel G41, Q43 and Q45 chipsets. Added initial support for the Intel QuickPath X58 (Tylersburg) chipset.
Added support for Intel Core i5 (Lynnfield) processors together with the Intel P55 and ICH11 chipsets. Added recognition of Windows 7 and validated on Build 7000 Beta 1 and Build 7100 RC1. Added support for Intel Core Duo L2000 (Yonah) series of low power processors. Allow for the Windows Task Bar being at the top of the screen. Size: ~ 1.26 mb
» Нажмите, для открытия спойлера | Press to open the spoiler «
Version 4.02 released on 14-Oct-2009
Updated to use Windows Themes on XP and later along with Split Buttons on Windows Vista and later. The -NOTHEME and -NOSPLIT qualifiers can be used to revert to the old style panels. Added support for Intel Xeon (Westmere) and the AMD Athlon II (Propus) processors. Added recognition of the Intel 82915GV and 82910GML chipsets. Added the -TRAY qualifier which causes SIV to start minimized in the Icon Tray, that on Close, Alt+F5 or [ OK ] SIV should minimize rather than exit and to add a Exit SIV menu entry. The -TRAY qualifier may be combined with -MONITOR and/or -GRAPH. Made the [Machine], [PCI Bus] and [MSR xxx] pages work on Wine/*nix systems when SIV is run as root. Added -KEEP which will create mode 644 "/dev/cpu//msr" devices and not delete them when SIV exits thus improving the operation of SIV for non-root users (by default mode 600 is used and the msr devices deleted).
Version 4.01 released on 14-Sep-2009
Added support for 256 CPUs on Windows 7 and Server 2008 R2 systems. Moved almost all the SIV resources into a resource only DLL, SIVRES.dll, that is shared by all the SIV executables. SIV can be run without SIVRES.dll and the only effect is you don't get the logo images, etc.. Added support for the Intel Core i9 (Gulftown), Core i5 (Clarkdale), Xeon (Lynnfield) and Xeon MP (Beckton) along with Pentium Dual-Core (Penryn) processors. Enhanced support for the Intel 3420 and P55 chipsets. Added support for AMD Opteron (Istanbul), (MagnyCours), Phenom II TWKR (Deneb), AMD Sempron (Sargas) processors and eight processor AMD Opteron configurations. Reworked the [MCH] page for all AMD64 based systems. Improved the reporting of HyperTransport information. Changed to report on Windows Error Reporting (WER) rather than Dr Watson on Windows Vista/2008 and later systems. Updated the [PCI Bus] page for improved reporting of the number of PCI buses and improved speed of device name lookup to PCIDEVS.txt. Updated SIV to be aware of Wine and to report the Wine and Host System version number information. Currently SIV has been mainly tested with Wine 1.1.29, but I would expect SIV to work with all recent Wine releases. Once available Wine 1.1.30 is recommended as there are a number of fixes SIV benefits from. Some of the SIV pages do not work due to Wine not supporting the full Windows API, when this happens SIV will report the API routine and the error code. Renamed the [Busy CPUs] page to [Test APIC], enhanced the worker thread code to check that the APIC of the CPU they are running on is as expected and the control thread to display the APIC test rates and incorrect APIC counts. Initially the tests are set to run without changing CPU ([Same CPU] mode). The check boxes or [Swap CPU] button can be used to tell the worker threads to switch between different CPUs ([Swap CPU] Mode). Enhanced the [View Menus] page to have a search/highlight facility. Correct the operation of 32-bit SIV on 64-bit systems to have the driver in %SystemRoot%\System32\Drivers\ rather than %SystemRoot%\SysWOW64\Drivers\. Added the System [File Cache] page and resolved a number of issues with Windows 7/Server 2008 R2 System File Cache reporting. Added the [Font Families] page which shows all the installed Font Families and the Character Sets they support. Added the [Graphics] page which shows all display modes for all installed Graphics Cards. Enhanced [Machine] to report Onboard Devices Extended Information.
Version 4.00 released on 14-Jul-2009
Added native 64-bit mode for both ia64 (Intel Itanium) and x64 (Intel64 and AMD64). There are 2 new images SIV64I.exe for Itanium and SIV64X.exe for Intel64/AMD64 systems. In order to minimise web-site usage and as most users will not need the 64-bit executables these currently these are additional downloads. Note that the 32-bit SIV image can still be used on 64-bit systems, but the native images will provide improved performance and support for more than 32 CPUs. Added support for Intel System Controller Hubs US15W, US15L and UL11L, the Intel 5100 and the Mobile Intel 4 Series PM45, GM45, GS45, GS40 and GL40 Series of chipsets. Added support for the AMD Geode LX processor along with the DM&P Vortex 86 DX, Vortex 86 MX and the Intel Xeon L5400 processors. Updated to use the new style Intel Processor and Chipset logos and improved chipset variant recognition. If SIV does not correctly report your Intel chipset please e-mail me the SIV -SAVE file, tell me what the chipset should actually be and I will try and improve things. Change format of PCIDEVS.txt to be similar to all the other definition files used by SIV and implemented PCIDEVS.exe for maintenance. Add PCIDEVS to the website downloads section. I have also added a lot of new devices and made a start to generally tidy things up. Note that I no longer use the PCIDEVS.txt from Craig Hart's site. Updated the operation of -SAVE to output the names of the save files to STDOUT, use the same name for the .DMI file as the .TXT file and enhanced the SIV command parsing to allow quoted file names which can be used in command lines such as SIV64X -SAVE=[OVERVIEW]="C:\Documents and Settings\save.txt" | more. The recommended command to generate save files is now SIV -SAVE | MORE, but using either SIV64X or SIV64I for 64-bit systems. Enhanced the [PCI Bus] page for systems with a lot of PCI Devices, more than would fit on one screen, by adding navigation buttons similar to the ones used on [Network] panels. Corrected the operation of [PCI Dev] for none English Windows systems which stored "Device PCI" rather then "PCI Device" in the Location Information. Added the [CPU Groups] page and updated SIV for systems with multiple CPU Groups. This has been validated on both Windows Server 2008 R2 and Windows 7 using V6.01 Build 7100 RC1 and Build 7264, however there may be issues with earlier builds due to SetThreadGroupAffinity() function changing from taking 2 parameters to 3. Currently SIV is still limited to 64 CPUs in total and I plan to address this in SIV V4.01, to this end if you have access to a system with more than 32 CPUs and would like to help test a SIV V4.01 Beta please e-mail me. Added the [csv] or [csv-titles] section to the SIV save file. Basically this section contains all the system and processor information that is summarised on the initial page in an orthogonal form that is easier to parse. [csv-titles] will include title/header lines that help in knowing what all the numbers represent. The general form is "system name",TAG,#,"p1","p2",... [SUB,"s1","s2",...]... If an atom is not quoted then it's a TAG, # or SUB directive, otherwise it's a TAG/SUB parameter. Future versions of SIV may add extra parameters, but existing parameters will NEVER be removed. If several SUBs are reporting the same set of information such as L1T/L1C/L1D/L2C/L2U/L3U cache information SUBs then they will all have exactly the same parameters. Currently the following TAGs are implemented. SYS Overall System information, MCH Memory Controller information, SMB SMBIOS System information, DIM SMBIOS Memory DIMM information, TMP System Temperatures, FAN System Fan Speeds, VLT System Voltages, MAP Disk Drive to Volume Mapping with Drive Letters, DSK Disk Drive SMART information and CPU Processor information More may be added in future releases of SIV. To finely control which TAGs are returned the -TAGS qualifier can be used the syntax is -TAGS[=TAG[:TAG]...] specifying -TAGS implies -SAVE=[csv] -NODMI.
Changed the default screen layout to reflect each processor chip having multiple logical processors. Added the -NOCHIP qualifier to revert to the old style screen layout. Added Disk Drive HDA Temperatures the default screen and ToolTips to show the range. The -NOSMART qualifier can be used to exclude them. Added support for Vertical Scroll Bars and updated [Machine], [PCI Bus], [S/W Name], [S/W Date], [HotFixes], [Graphics], [Devices], [CPUs], [Device Tree], [USB Bus] and many other panels to utilise them. Set default ToolTip AutoPop delay to 30 seconds and added the Delay ToolTip registry entry. Before it was usually 5 seconds for the default DoubleClickTime of 500ms. Added dynamic update of the QPI/HT Link speed, added the speed range to the ToolTip and updated the CPU speed ToolTip to include the minimum speed. Added support for the Intel Q57 PCI Express chipset and the Celeron Dual-Core T3000 (Penryn) Series of Processors. Added the [WLAN Profiles] panel to display and optionally delete Native Wi-Fi WLAN Profiles. Changed to display a [Wi-Fi] rather than a [Modem] button for Windows Vista and later, also added a -MODEM switch. Added [Save Selected] and enhanced [Save All] to pop up a window as soon as the operation starts and update it as the save progresses. Corrected save to work on Windows 9x systems. Enhanced [About] to show the state of the command switches.
» Нажмите, для открытия спойлера | Press to open the spoiler «
Added support for Intel Core i5 M400 (Arrandale) series and the HM57 chipset. Added support for Intel QST and the [QST Status] page to show detailed QST information. Added the [Ping Network] page to allow a specified range of IP Addresses to be pinged. With the 32-bit builds SIV will use up to 64 worker threads and achieves a rate of around 120 per second for 256 or more pings. The 64-bit builds will use up to 512 worker threads which for 2,048 or more pings at 1,000 per second. To specify sparse addresses use ranges such as 10.0.16.0 to 10.7.19.255 which will ping 8,160 ( 8 x 4 x 255 ) IP addresses. The worker threads are set to have different Ideal Processors and are distributed to multiple CPU Groups.
» Нажмите, для открытия спойлера | Press to open the spoiler «
Added use of the ACPI _PSS method to evaluate and show the current CPU power levels. This works on many Core 2 and a few Pentium 4 systems. Added the -NOSIVREG command line qualifier to tell SIV not to save information in the Windows Registry. When SIV is run from a DVD/CD or Removable Drive (USB Flash Drive) that is not the system drive the default is -NOSIVREG. Added CPU Core, Disk Drive and Thermal Zone information to the -MONITOR mode logging file. Changed the format to be the same as for -TAG information. Added -ENVLOG= and -EXCEL= to enable environment information logging and set the logging interval. The -EXCEL files are designed for viewing with Excel and similar. Added -MONLOG= to set -MONITOR mode and the logging interval. Added the [ASUS Info] page which to shows the ACPI\ATK0110 sensor information. Added support for ACPI Method Evaluations and the [ACPI Eval] page which shows these. If there is an issue with the ACPI method evaluation then the command: siv -dbghal -save=[initial][acpi-hal][acpi-eval]=acpi.txt > acpi.log | more should be used to find and then report the ACPI method causing the issue.
» Нажмите, для открытия спойлера | Press to open the spoiler «
Added reporting of Intel Rapid Storage Technology RAID Sets and Drives including disk temperature reporting. Added support for the On Semiconductor ASP0800 power controller to report the CPU Voltage, Current and Power usage. Added all three to the H/W Status panel and display of the Power on the initial screen. Added real-time DIMM Temperature reporting for Crucial Ballistix Finned DDR3 Memory Modules with Thermal Sensors. Added support for the VIA Nano Dual-Core processor and also for the Intel HM55 chipset.
» Нажмите, для открытия спойлера | Press to open the spoiler «
Added support for the Intel Core i3/i5/i7 (Sandy Bridge) processors, B65, H61, H65, HM65, H67, HM67, P65, PM65, P67, Q67, QM67, QS67, UM67, Z68, C202, C204 and C206 chipsets. Added support for the ITE IT8728 and IT8772 Super I/O LPC controllers. Updated support for the AMD Opteron 6100 (Magny-Cours) series processors. Added support for the SR5690, SR5670, SR5650 and SP5100 chipsets. Updated support for the DM&P Vortex86 DX / MX SoC CPUs. Updated the [USB Bus] page to report the DeviceHubNestedTooDeeply, DeviceInLegacyHub, DeviceEnumerating and DeviceReset states.
» Нажмите, для открытия спойлера | Press to open the spoiler «
Version 4.19 released on 14-Apr-2011 Resolved issue with SIV64X.exe V4.18 on AMD systems that was caused by a C compiler bug! Version 4.18 released on 14-Apr-2011 Enhanced the [Network] panels to work Asynchronously such that after two seconds if some systems have not responded the panel will popup and SIV will update the panel as information becomes available. The two second timeout starts once SIV has the list of computers which usually does not take very long. Added the -ASYNC and -NOASYNC options to enable and disable asynchronous operation. Note that for save files the [Network] information is always synchronous. Added Tool Tips to the [Network] pages for the thread counts, delay times and to show wide text. Added Tool Tips to the large network screen navigation buttons and changed to have one button for each screen rather than as many buttons as there is space for. Enhanced the [Filter] panel to show the total systems for each version of Windows. Resolved a thread rundown issue which was triggered by changing the Font or Language. Usually SIV would gain 4 extra threads and intermittently this also caused an application fault. Improved the support of nVidia nForce SMBus Controllers. Resolved an issue with SIVDRIVER and reduced the number of "fixme" reports when using Wine. Updated [USB Bus] to support systems with more than 10 Root Hub Controllers and allow for unexpected names such as HCD: rather than HCDA.
» Нажмите, для открытия спойлера | Press to open the spoiler «
* Added initial support for the Intel X79 chipset, Core i7 and Xeon (Sandy Bridge-EP) processors. * Added initial AMD FX (Zambezi), Opteron (Valencia) and Opteron (Interlagos) support. * Added SCSI Disk Drive temperature reporting and improved eSATA hot-plug support by processing WM_DEVICECHANGE messages. * Added [SPD Save] (Menu->File->Save DIMM SPD) which saves the DIMM SPD information as binary files. * Added VIA Nano X3 support. Resolved timing issue with VIA VX900 and VT8261 SMBus access.
Changes in 4.22: - Added support for SMART and temperature reporting on all USB-to-SATA Bridges that support SCSIOP_ATA_PASSTHROUGH12 plus most Cypress, JMicron and Sunplus based bridges. Improved all SATA/PATA SMART attribute and SCSI LOG SENSE reporting. - Added reporting of Windows CE device information. - Added nVidia MCP73 Chipset SMBus and Memory Timings support.
Changelog: -Added the [Memory Speed] panel which reports the memory speed for each CPU accessing memory from each NUMA Node. -Added initial Intel Atom N2800 (Cedarview) support. -Added BIOS [MPS], ACPI [SLIT], [SRAT] reports and include physical 0x0E0000 in .DMI files.. -Added support for the AMD-8111 chipset SMBus and the ADM1026 Thermal Controller as used on RIOWORKS HDAMA motherboards.
Changelog: -Added the [GPU SLI] to report nVidia SLI Topologies and [GPU Crossfire] to report AMD Crossfire. -Added Fintek F71808A and Tyan S8812 DIMM SPD MUX support. -Resolved AMD Phenom Core Temperature updating issue. -Renamed SIV.exe to SIV32L.exe to signify 32-bit Legacy.
» Нажмите, для открытия спойлера | Press to open the spoiler «
* Improved AMD FX-8150 Eight-Core (Zambezi) speed reporting and fixed an issue with the [MCH] page. * Added the nVidia [GPU CUDA] reporting page, current nVidia GPU Frame Buffer usage and the [Dummy DVI] page. * Added nVidia MCP61, MCP65, MCP67/68, MCP73, MCP77/78, MCP79/7A and MCP7B temperature reporting. * Added the [BOINC Status] page which lists BOINC processes and GPU Memory Use or Temperatures. Including an option to set the CPU Affinity for Idle Priority Class BOINC clients. On a system with HyperThreading different cores will be used when possible. * Added the monitoring of Battery or UPS current voltage, charge level and the estimated time remaining. * Added a [SIV Autorun] on login setup facility. * Updated Bulgarian and Portuguese translations
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
-Windows 8 Prerelease V6.02 Build 8250 support validated, driver ACPI operations enabled and -Thermal Zones fixed. -Added the [CPU Benchmark] page. Added initial AMD A10 APU (Trinity) support. -Added the [RDP Sessions] page. Added APC UPS HID support to the [Battery] page. -Added cached WU summary to the [BOINC Status] panel and the -BOINC=HIDE qualifier. -Updated [Remove SIV] to include any [SIV Autorun] entry. Added the select [Clipboard Viewer] panel. -Updated the Romanian and Turkish translations. Resolved issue running under Wine when the SMBIOS/DMI data is outside the usual 128KB area.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
* Added Intel Ivy Bridge Processor and 7 Series Chipset Support. Improved Intel X79 and added C600 chipset support. * Added GPU % load summary, nVidia GTX 680 power support, updated clock speed reporting and CUDA Peak GFLOPS calculations. * Added the [HID Bus] and [PMB Bus] panels. Improved APC USB/HID UPS support and reporting. * Added Gigabyte Z77 and X79 motherboard support including the reporting of the PMBus based Digital Power Controllers. * Added Menu->File->Save Public to generate save files with private information excluded. * Added the -PATH="[;]" qualifier which can be used to specify the folders of a BOINC instance. * Updated Intel DX58SO motherboard for ADT7490 sensors being used rather than aSC7621 on later board revisions. * Fixed Wine "1.4" recognition issue.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
Updated GTX 600 series voltage reporting, the [GPU Info] panel layout and overclocked nVidia GPUs. Added reporting of nVidia GPU Performance Decrease reasons. Display GPU fan speed RPM and % when both are available. Updated [BOINC Status] to show when Network Activity is allowed and if not to defer Auto Retry. Added a facility to set GPU tasks to run at Above Normal priority. Added Nuvoton NCT6779D sensor support. Fixed [GPU CUDA] for elderly 258.96 drivers. Resolved an [ACPI Eval] timeout issue with "EC0_WEOF" on the ASUS U36SD
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
• Windows 8 Release Preview V6.02 Build 8400 support validated and driver ACPI operations enabled. • Added the [Embedded Controller] page and EC sensor reporting for ASUS P8Z77 motherboards.. • Added Enable of the X7, P7, P6 and P5 Series Chipset Thermal Controller. • Update [GPU Apps] to allow for no nVidia GPU when NVAPI is present. • Update to use --get_state for BOINC V7.00.26 and later as the --get_simple_gui_info output has changed. • Added -INIT=NOAPM to tell SIV to try and Disable APM on all the disk drives and then exit.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Added Ivy Bridge + Sandy Bridge GPU Clock speed, Voltage, Temperature and Power reporting. Resolved issues with Ivy Bridge memory speed and "siv -save=[win-ce]=". When "EnableBalloonTips" is FALSE don't use Balloon Tool Tips.
SIV Unicode Release Kit for Windows XP and later systems. You should use SIV32X.exe on 32-bit Windows x86 and SIV64X.exe on 64-bit Windows x64.
» Нажмите, для открытия спойлера | Press to open the spoiler «
Improved Intel Haswell support and updated to use the latest Intel logos. Added initial AMD Annapurna (Richland) support. Revised nVidia Optimus GPU reporting to prevent forcing the GPU back online. Added generic support for Embedded Controller ACPI Method based Temperature and Fan Speed reporting. Added initial ITE IT8731F and IT8732F sensor support. Resolved ASUS P5B motherboard ATK0110 conflict with Intel QST, QST Voltage monitoring and CPU Fan Speed reporting. Added reporting of Matrox MGA G200/G200eH/G200eR/G200eW WPCM450 clocks and G450/G550 Warp clock.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
» Нажмите, для открытия спойлера | Press to open the spoiler «
Validated Windows 8.1 RTM Build 9600 support, enabled ACPI operations and added . Added Intel Atom (Bay Trail) support and allow for IA Core without Package power. Added ITE IT8790E sensor chip reporting and updated Gigabyte Z87X motherboard support. Added SMART Media Wearout Indicator and Total NAND Program Count reporting. Update to compensate for changes in Intel Rapid Storage Technology V12.08.0.1016. Added nVidia MCP73V chipset and MSI MS-7366 motherboard support. Added Intel DX79SI and ECS 945GZ motherboard support. Allow for some ACPI\INT340E methods reporting 0x80000000. Updated the [SMBus Locks] panel for latest AIDA64 plus EasyTune and added SensorDetector.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Added ITE IT8603F support and improved AMD APU (Kaveri) plus (Trinity) power reporting. Added persistent Temperature Scale selection and -TEMP=X to specify the temperature scale as °X. Improved Sandy Bridge-E and Ivy Bridge-E QPI Link speed reporting. Improved Haswell-E support, added initial DDR4 SPD and Thermal Sensor support. Added ASRock FM2A88M plus P67 motherboard support and corrected the ASRock X79 Champion DRAM and VTT +1.2 voltage reporting. Improved UPS power reporting for APC Back-UPS RS 550GI. Resolved issue with [ACPI Eval] on Dell PowerEdge R910 systems.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Version 4.46 released on 14-Jul-2014 Update the [Windows] panel to display the Registered Processors plus Memory Allowed and added the [Windows Policies] panel for Vista and later. Added reporting of any Hypervisor Virtual Machine and for Windows 8.1 V6.03 Build 9600 if Update 1 is installed. Added the [Makers] panel which shows all the System and Motherboard Makers for all systems within a domain. Added reporting of the number of active memory channels for Intel 5000, 5400 and 7300 chipsets. Improve reporting of memory timing information on some Intel X38/X48 chipsets by enabling MCHBAR. Report the Peak GFLOPS for nVidia GTX/GT 700 series CUDA GPUs. Resolved issue with strange CPU % usage reporting that only happened on some Windows 7 x64 systems. Corrected the reporting of DDR3 DIMM SPD information for DIMMs with none zero FTB values. Improve the Controller Name for Texas Instruments XHCI Controller attached USB Disk Drives. Added support for the Intel D5400XS (Skulltrail) and Gigabyte Z97X-SOC Force motherboards including IR3580 PWMs. Compensate for Wine calling RaiseException() when SLGetWindowsInformation() is called.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Improved Intel Core i7 (Haswell-E) and X99 Chipset support. Added support for Nuvoton NCT6791D sensors, ASUS H87M-PRO, Gigabyte Z87X-D3H and Intel DX48BT2 motherboards. Added support for Intersil ISL6379 PWMs and the ASRock X99 series motherboards. Added reporting of nVidia GPU Video clock speeds by using NVAPI_GPU_PUBLIC_CLOCK_VIDEO (new in R340 NVAPI). Added reporting of Corsair Link Temperature and Fan/Pump Speed for H100i, H80i, etc.. This is available only when Corsair Link is not active as Corsair Link does not use the Access_CorsairLink mutex to interlock access to the Corsair Integrated USB Bridge. Added support for Intel ACPI Power Management Devices (ACPI\INT33FD). Added exclusion for the ACPI \SAM_\UATB method.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Added support for Windows 10 V10.00 Build 9926. Enabled operation of [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Added SMART reporting for Prolific Technology PL2773 USB to SATA Bridge attached Disk Drives. Rationalised GPU reporting and resolved issue with the GPU-n Tool Tip on none nVidia/AMD GPUs. Allow for systems with AMD GPUs and have up to 64 displays. Reworked the initial screen layout logic to better deal with an excessive number of Temperatures, Voltages and Fan Speeds. Added re-initialisation of C-Link hardware about 30 seconds after resuming from sleep/hibernate when running in -CRLCTL mode. Updated [Link Fans] to workaround CL Mini, H110iGT, H100i and H80i manual feedback firmware issues when -CRLCTL is specified. Enhanced the [Link Status] dumps to report all instances of the data. Added reporting of Corsair AXi PSU -12 Volt information and support for the RM-Series PSU C-Link Adapter. Note that SIV will report RM-Series PSU information even when CL is active. Added Nuvoton NCT6792D HWM, Intersil ISL6388 PWM sensor, EVGA 150-SE-E789, Gigabyte X99-SOC, MSI MS-7693 and MS-7888 motherboard support. Added Ukrainian support. Workaround STATUS_DATATYPE_MISALIGNMENT issue within WinVerifyTrust() on Itanium.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Migrated from the SHA-1 to SHA-2 code signing. This has no real impact on most systems, but to use SIV V5 on W7 you need KB3033929 installed and on Vista x64 to disable Driver Signature Verification. Added support for Windows 10 V10.00 Build 10074. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Resolved race condition when -CRLCTL is being used that causes intermittent issues on some systems. Added Synthetic Temperatures (Menu->Tools->Configuration->Synthetic Setup) so custom curves can use the highest reading of multiple sensors and/or this can be displayed on the [Status] panel. Added initial Intel Core i7 (Broadwell-H) and Intel Atom (Braswell) reporting. Added ASRock Z97 OC Formula, ASUS MAXIMUS VII GENE, P8B75, P8Z77-V, Gigabyte Z97X-UD3, MSI MS-7881, Supermicro H8DMU and X10DAX motherboard support. Extended ASUS Rampage IV motherboard support for embedded controller temperature, fan speed and voltage reporting. Added Nuvoton W83793G SMBus hardware monitoring support. Added the -SINGLE command line qualifier specify that only a single instance of SIV should be active.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Added support for Windows 10 TH2 V10.00 Build 10565. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Added Custom Curve support for Corsair AXi, HXi and RMi PSU fans. Resolved issue with Disk Drives not being detected on some systems with some versions of the Intel RST driver. Resolved issue with -GPUCTL fan control of some GTX 980 GPUs and improved support for 0 RPM GPU fan reporting. Resolved issue with [My IP Address] that was caused by the http://ipinfodb.com/ servers changing. Updated Skylake logos. Improved ASUS Z170 based motherboard support. Improved the Core i3/i5 (Arrandale) and GM45 iGPU core speed reporting. Added ASUS P9X79-E WS, Sabertooth X79, Z87-Pro, Dell 1557, 1757, 1564, 1764 and Alpha DS20 support. Resolved issue with ACPI Eval on ASUS P9X79-E WS and some HP ZX1 based Itanium systems. Allow for some nVidia GPUs only reporting limited Video Clock information.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Version 5.09 released on 14-Apr-2016 Added support for Windows 10 RS1 V10.00 Build 14316. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Added AIO LEDs, rather more CPU + GPU information and Cut + Copy + Paste to LCD Panels. Allow selection of Themed or Standard LCDs. Added ACPI Thermal Zone support to LCD Panels and Synthetics. Allow motherboard fan and some temperature names to be changed. Added support for the ASUS Z10PE-D16 + Gigabyte Z87X-UD3 + X99-UD4 motherboards. Added SMSC SCH5627 + SCH5636 support. Improved AMD Opteron (Interlagos) and (Zurich) support. Added Antec Kuhler 1250 support. To enable this use [Link Devices] to set AIO-Kuhler-Enable in the Device Parameters.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Version 5.13 released on 24-Sep-2016 Added support for Windows 10 RS2 V10.00 Build 14931. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Added NZXT GRID+ V2 support, to enable a GRID+ check [_]AIO-GRID-A-Enable on [Link Devices] then restart SIV. Extended [Link Setup] to allow the cooler associated with each CPU package to be specified. Resolved issue with SIV reporting of Corsair HXi + RMi PSUs after the system is resumed from sleep/hibernate. Added ASUS Strix X99 + Fujitsu D2464 + Gigabyte Z97X-UD5 + Intel DZ77GA + MSI MS-7919 motherboard support.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Version 5.15 released on 21-Jan-2017 Added support for Windows 10 RS2 V10.00 Build 15014. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Enhanced [Synthetic Setup] to allow temperatures to be relative to an ambient temperature. Added ITE IT8665 sensor support. Sanity check AMD GPU voltages and suppress any that are out of range. Added ASUS A320M-C + B85M-G + Rampage IV Gene + X99-Deluxe II + Gigabyte Z270X-Gaming 7 + MSI MS-7995 motherboard support.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Version 5.16 released on 14-Feb-2017 Added support for Windows 10 RS2 V10.00 Build 15031. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. Added -AIOLED which enables the LEDs on Corsair Vengeance LED DIMMs to be controlled. Only RED is used and GREEN + BLUE are ignored. Show DIMM LEDs on [DIMM Status]. Added -EXIT=10 to specify SIV should exit after about 10 seconds. Added NZXT Kraken X52 reporting support. Improved X99/X79 system IMC SMBus reading when TSOD/CLTT is enabled and added [SMBus Info] panel. Enhance exported processor frequency granularity to 0.01 MHz and add System Clock (BCLK/FSB) + per CPU multipliers. Resolved issue with double reporting some disk drives on some systems with >= 2 CSMI RAID controllers. Resolved issue with [USB Bus] reporting the speed as High rather than Super/Plus on some systems. Added ASUS Maximus IX + Prime Z270-P + Sabertooth 990FX/Gen3 R2.0 + Strix Z270E + Gigabyte Z270-HD3P + MSI MS-7A58 + MS-7A78 motherboards and Nuvoton NCT6795D sensor support.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Version 5.18 released on 10-Apr-2017 Windows 10 Creators Update V10.00 RS2 Build 15063 + RS3 Build 16170 support. Enabled operation of [ACPI HAL], [ACPI Buses], [ACPI Eval] and [ACPI Ports]. AMD Ryzen 5 support. Added AMD Ryzen VDD CPU + VDD SOC Voltage + Current + Power and initial SP3/SP4 support. Renamed [SMBus Locks] to [Lock Usage], enhanced it to report the number of other utilities that are using the lock and added [Lock Handle] which lists which programs are using the locks. Added GPU Power Reporting for AMD Radeon RX 480 graphics cards. Allow for systems with 32 NUMA nodes. Resolved HTTP Error 400 - Bad Request issue that was triggered by a webserver change. Addressed race issue on some systems when [Sensor Debug] is closed and added unexpected timeout logging. Added ASRock X370 Taichi + ASUS Crosshair VI Hero + EVGA X58 SLI Classified + X58 Classified + Gigabyte AB350-Gaming + Z97X-Gaming 7 + MSI MS-7A34 motherboard support. Improved ITE IT8665E fan speed reporting.
»» Нажмите, для закрытия спойлера | Press to close the spoiler ««
Added Windows 10 Build 17763 RS5 + Build 18252 19H1 support. Enabled operation of [ACPI Eval], etc.. Added support for RTX 2080 + RTX 2080 Ti GPUs which report multiple fans. Added AMD Athlon (Raven Ridge) + Intel Core i9 (Coffee Lake-S) + Core i5 (Coffee Lake-U) support. Added Thermaltake DPS G RGB 1250W LED control support. Added Menu->Edit->Power Setup->Turn Screens Off support including [Hotkeys]. Added initial support for ASRock Ultra Quad M.2 card fan reporting and control. When reporting via ASUS WMI use EC in preference to SIO voltages. Added ASRock A320M-HDV + Z390 Taichi + ASUS Strix Z390-F + EVGA 151-BE-E097 motherboard support.
Изменения в версии: - Добавлена поддержка Windows 11 23H2 Build 25276. Включена работа [ACPI Eval] и т. д. - Добавлена поддержка процессоров Intel N-Series (Alder Lake-N). - Добавлена отчетность HXi + RMi OCP Multi Rail в [Link Power] и контроль для блоков питания RMi. - Улучшены отчеты о мощности и температуре графического процессора NVidia и обновлено для использования NVAPI R525. Улучшена поддержка AMD Radeon RX 7900. - Компенсация за отсутствие поддержки CP_UTF8 в Windows 95 + Windows NT V3.nn. - Обновлено для использования Glenfly Graphics GFAPI V1.10. Примечание. Если GFAPI недоступен, SIV напрямую считывает регистры графического процессора.
4.6 Mb