PRYANIK, 23.08.2005 - 23:15
http://www.pysoft.com...ge_0.gif" align="left">
Active WebCam 6.2 + CracK
Описание: Active WebCam 6.2 - Программа снимает сигнал с web- или видеокамеры с максимальной частотой 20 кадров в секунду. Трансляцию вы можете организовывать как напрямую с вашего компьютера, так и через FTP-сервер (куда первоначально осуществляется upload с вашего компьютера). Согласно заявлениям разработчиков, не обязательно использование классической web-камеры, вполне работоспособна связка «плата захвата видеосигнала + видеокамера». Захватываемый сигнал вы можете просматривать без установки каких-либо дополнительных плагинов. Более того, при желании вы можете сохранять захваченный сигнал в AVI или MPEG, и даже включать отсылку определенных уведомлений при наличии засекаемых движений перед камерой, что позволяет использовать Active WebCam в качестве реальной системы слежения.
Active WebCam 6.2 captures images up to 30 frames per second from any video device including USB, analog cameras, TV-boards, camcorders, and from network IP cameras.
The program performs simultaneous recording and broadcasting from unlimited number of cameras.
Remote Access - allows other computers access the camera using the Active WebCam program. The program uses UDP protocol to push captured images and sound to viewers' computers. Transferred video and audio can be encrypted and password protected.
FTP Upload - the program uploads images to your web site using FTP protocol. Your viewers point Internet browsers to your web site and watch the captured video. The captured video can be viewed using any Internet browser, no plug-ins or downloads required.
HTTP Server - the program runs own HTTP server that all users, connected to your computer using Internet browser, can see live video from your camera. The captured video can be viewed using any Internet browser, no plug-ins or downloads required.
Home: http://www.pysoft.com...amMainpage.htmLink: http://www.activewebc...ds/AWC-PYS.exe ~ 10.56 Mb
SharewareЯзык интерфейса: ENGCracK Active WebCam 6.2 ~ 1.5 Mb
P.S На сайте стоит антилич, поэтому качать через браузер или "рефер-ссылку" http://softoroom.org
Syrax, 1.08.2008 - 22:13
Active WebCam v10.9Features » Нажмите, для открытия спойлера | Press to open the spoiler «
· Works with all USB and Parallel Port cameras, Windows compatible Capture Devices and Framegrabbers, TV-boards, and with Network IP Cameras.
· Broadcasts live video up to 30 frames per second.
· Multiple cameras support. Simultaneous recording and broadcasting from unlimited number of cameras.
·Dynamic IP Service, that gives a permanent internet address to your web camera whenever IP of your computer changes.
· Time stamps captured video.
· Broadcasts audio.
· Supports Encrypted Transmission.
· Records password protected video clips.
· Performs Live Recording that allows rewind and playback captured content at any time.· Has features to control camera's Pan, Tilt, and Zoom.
· Helps you to create web page for your web camera.
· Records video when a motion is detected.
· Allows to view recorded video remotely.
· Sends you e-mail when motion detected.
· Runs a program when a motion is detected.
· Allows to define the active area for motion detection.
· Creates thumbnails from captured images.
· Has a comprehensive scheduler.
· Checks the available space on hard drive and stops recording if there is no available space.
· User name and password to control access to your camera and recorded videos from Internet.
· Has feature to limit number of camera viewers.
· Stealth mode makes the program completely invisible that it doesn't display any icon in the sys tool tray and it is not presented in the task bar tray.
· Password protection from unauthorized usage.
· Ability to run the program as Windows service that the program starts automatically at system boot and executes even when no user is logged on to the system.
potok, 1.11.2010 - 12:04
Цитата | Quote(DarckImperator @ 1.11.2010 - 16:00)
блин sad.gif а можно тогда старенькую версию ? я там проверил в прошлых постах ссылки уже мёртвые .
Постом выше расписано всё,оттуда и качайте.
DarckImperator, 18.10.2011 - 17:33
вот уже пять месяцев использую данную программу для видеонаблюдения всё бы ничего , но столкнулся с одной маленькой проблемой программа сама по своей воле проверяет себя на валидность (версия 10.9) автоапдейд отключил и всё равно не помогает . Интернете читал ,что мол не правильно крякнута и тому подобное что удалять надо , реестер чистить ....короче нифига не помогло. Читал ,что надо её фаерволом от интернета оградить ,но по скольку у меня с недавних пор провайдером стал мегафон (usb 3g) то надобность в фаере отпала так как тут все порты закрыты в чём кстати большая проблема с торентами .Но выход я всё таки нашёл причём его подсказал мне вирус, думаю многие сталкивались с такой штукой когда заходишь на поисковик или в какую ни будь соц. сеть то тебя перекидывают на подставной сайт или страничка не отображается а виной этому правленый вирусом файл hosts (но есть случай когда и не в нём дело всё зависит от вируса) в общем это натолкнуло меня на мысль что можно просто заблокировать доступ к сайту программы
pysoft.com
с помощью правки этого файла сделав это я радовался два дня потом опять вылезло сообщение что "регистрационные данные не правильные" тогда я поставил снифер NetResident и смотрел куда лезет прога и выяснилось, что она для проверки стучит вот по этому адресу
check-reg-name.pysoft.com
после того как я ввёл этот адрес в хосте сообщение больше не было
и так сам метод правки для тех кто не делал такого
Ищем файл hosts который находится вот тут C:\Windows\System32\drivers\etc
открываем его с помощью блокнота само содержимое должно быть примерно таким
# Copyright © 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
и дописываем в конце нужные строки в итоге должно получится вот так
# Copyright © 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
127.0.0.1 pysoft.com
127.0.0.1 check-reg-name.pysoft.com
Внимание ! пробел между адресом 127.0.0.1 и сайтом делайте с помощью клавиши TAB
после сохраните и перезагрузитесь если у вас ХР лично у меня на семёрке всё заработало сразу без перезагрузки ,чтобы убедится всё ли работает просто введите адреса в браузере если всё норма то у вас будет пустая страница.